USB Device Controller with CMOS Z86K15 MCU
PRELIMINARY PRODUCT SPECIFICATION
1
Z86U18
USB DEVICE CONTROLLER WITH CMOS Z86K15 MCU
FEATURES
Device Z86U18
s
1
ROM...
Description
PRELIMINARY PRODUCT SPECIFICATION
1
Z86U18
USB DEVICE CONTROLLER WITH CMOS Z86K15 MCU
FEATURES
Device Z86U18
s
1
ROM (KB) 4
RAM (Bytes) 188
I/O Lines 32
Speed (MHz) 6
s s
Intergrated USB Transceiver @ 1.5 Mb/sec For Use In A Variety of Applications Including Keyboards and Game Controllers Programmable 8-Bit Counter/Timer, Programmable Prescaler with 6-Bit
USB Serial Interface Engine, Transceiver, and MCU Intergrated for USB Function Controller +4.0V to +5.5V Operating Range Low Power Consumption: 60 mW @ 6 MHz
s
s s s
s
Five Vectored, Priority Interrupts from Five Different Sources On-Chip Oscillator, Which Accepts A Crystal, Ceramic Resonator, LC or External Clock Drive (all clock speeds @ 6 MHz) Low System EMI Emission HALT/STOP Modes
s
Digital Inputs CMOS Levels with Internal Pull-Up Resistors Four Direct Connect LED Drive Ports Power-On Reset (POR), Hardware Watch-Dog Timer (WDT)
s s
s s
GENERAL DESCRIPTION
The Z86U18 USB Controller is a member of the Z8ยจ MCU family. The Z86U18 is characterized by a flexible I/O scheme, an efficient register architecture, and a number of ancillary features. It contains a dedicated USB interface (transceiver and SIE). For applications demanding powerful I/O capabilities, the Z86U18 (40- and 44-pin versions) provides 32 pins dedicated to application input and output. These lines are grouped into four ports, each port consists of eight lines and are configurable under software control to provide timing, status signals, and ...
Similar Datasheet