IR MICROCONTROLLER
PRODUCT SPECIFICATION
1
Z86C72/C92/L72/L92
IR MICROCONTROLLER
FEATURES
Part Z86C72 Z86C92 Z86L72 Z86L92 ROM (KB) 16 0 ...
Description
PRODUCT SPECIFICATION
1
Z86C72/C92/L72/L92
IR MICROCONTROLLER
FEATURES
Part Z86C72 Z86C92 Z86L72 Z86L92 ROM (KB) 16 0 16 0 RAM* (Bytes) 748 748 748 748 – I/O 31 31 31 31 Voltage Range 4.5V to 5.5V 4.5V to 5.5V 2.0V to 3.9V 2.0V to 3.9V
s
1
Programmable Input Glitch Filter for Pulse Reception
Five Priority Interrupts – Three External – Two Assigned to Counter/Timers Low Voltage Detection and Standby Mode Programmable Watch-Dog/Power-On Reset Circuits Two Independent Comparators with Programmable Interrupt Polarity On-Chip Oscillator that Accepts a Crystal, Ceramic Resonator, LC, RC (mask option), or External Clock Drive Mask Selectable 200 kOhms Pull-Ups on Ports 0, 2, 3 – All Eight Port 2 Bits at one time or Not – Pull-Ups Automatically Disabled Upon Selecting Individual Pins as Outputs Maskable Mouse/Trackball Interface on P00 Through P03 is available on the L72 version. 32 kHz Oscillator Mask Option
Note: *General-Purpose s s s
s s
Expanded Register File Control Registers Low Power Consumption - 40 mW (typical) Three Standby Modes: – STOP – HALT – Low Voltage Automatic External ROM (Z86LX2/C72 Version) Access Beyond 16K
s
s
s
s
s
Special Architecture to Automate Both Generation and Reception of Complex Pulses or Signals: – One Programmable 8-Bit Counter/Timer with Two Capture Register – One Programmable 16-Bit Counter/Timer with One Capture Register
s
s
GENERAL DESCRIPTION
The Z86LX2/CX2 family of IR (Infrared) are ROM/ROMless-based members of the Z8® MCU s...
Similar Datasheet