DatasheetsPDF.com

Z86C06 Dataheets PDF



Part Number Z86C06
Manufacturers Zilog.
Logo Zilog.
Description CMOS Z8 8-BIT CCP CONSUMER CONTROLLER PROCESSORS
Datasheet Z86C06 DatasheetZ86C06 Datasheet (PDF)

Z86C03/C06 CMOS Z8 ® 8-BIT CCP™ CONSUMER CONTROLLER PROCESSORS CUSTOMERPROCUREMENTSPECIFICATION Z86C03/C06 CMOS Z8® 8-BIT CCP™ CONSUMERCONTROLLERPROCESSORS FEATURES Part Z86C03 Z86C06 s s s s ROM 512 bytes 1 Kbyte RAM 60 124 Speed 8 MHz 12 MHz s s s s s s Software-Enabled Watch-Dog Timer Power-On Reset Timer Two Standby Modes: STOP and HALT Two Comparators with Programmable Interrupt Polarity 14 Input/Output Lines (Two with Comparator Inputs) On-Chip Oscillator that Accepts a Crystal, Cer.

  Z86C06   Z86C06


Document
Z86C03/C06 CMOS Z8 ® 8-BIT CCP™ CONSUMER CONTROLLER PROCESSORS CUSTOMERPROCUREMENTSPECIFICATION Z86C03/C06 CMOS Z8® 8-BIT CCP™ CONSUMERCONTROLLERPROCESSORS FEATURES Part Z86C03 Z86C06 s s s s ROM 512 bytes 1 Kbyte RAM 60 124 Speed 8 MHz 12 MHz s s s s s s Software-Enabled Watch-Dog Timer Power-On Reset Timer Two Standby Modes: STOP and HALT Two Comparators with Programmable Interrupt Polarity 14 Input/Output Lines (Two with Comparator Inputs) On-Chip Oscillator that Accepts a Crystal, Ceramic Resonator, LC, RC, or External Clock Drive. Serial Peripheral Interface (SPI) (Z86C06 Only) Software Programmable Low EMI Mode ROM Protect Option Auto Latches 18-Pin Package (DIP, SOIC) 3.0 to 5.5 Volt Operating Range Operating Temperature: –40 °C to +105° C Fast Instruction Pointer: 1.5 µs @ 8 MHz (C03); 1.0 µs @ 12 MHz (C06) Multiple Expanded Register File Control Registers and Two SPI Registers (Z86C06 only) One/Two Programmable 8-Bit Counter/Timers, Each with a 6-Bit Programmable Prescaler Six Vectored, Priority Interrupts from Six Different Sources s s s s s s s GENERAL DESCRIPTION The Z86C03/C06 CCP ™ (Consumer Controller Processors) are members of Zilog's the Z8® single-chip microcontroller family with enhanced wake-up circuitry, programmable watch-dog timers and low noise/EMI options. These enhancements result in a more efficient, costeffective design and provide the user with increased design flexibility over the standard Z8 microcontroller core. With 512 and 1K bytes of ROM and 60 and 124 bytes of general-purpose RAM, respectively, these low cost, low power consumption CMOS microcontrollers offer fast execution, efficient use of memory, sophisticated interrupts, input/output bit manipulation capabilities, and easy hardware/software system expansion. The Z86C03/C06 CCP architecture is characterized by Zilog’s 8-bit microcontroller core with the addition of an Expanded Register File to allow easy access to register mapped peripheral and I/O circuits. The Z86C03/C06 offers a flexible I/O scheme, an efficient register and address space structure, and a number of ancillary features that are useful in many consumer, automotive, and industrial applications. For applications demanding powerful I/O capabilities, the Z86C03/C06 provides 14 pins dedicated to input and output. These lines are grouped into two ports and are configurable under software control to provide timing, status signals, or parallel I/O. DS95DZ80300 1 Z86C03/C06 CMOS Z8® 8-BIT CCP™ C ONSUMER CONTROLLER PROCESSORS GENERAL DESCRIPTION (Continued) Three basic address spaces are available to support this wide range of configurations: Program Memory, Register File, and Expanded Register File. The Register File is composed of 61/125 bytes of General-Purpose Registers, two I/O Port registers, and 12/14 Control and Status registers. The Expanded Register File consists of three control registers in the Z86C03, and four control registers, a SPI Receive Buffer, and a SPI compare register in the Z86C06. With powerful peripheral features such, as on-board comparators, counter/timer(s), Watch-Dog Timer (WDT), and Serial Peripheral Interface (SPI) (C06 only), the Z86C03/ C06 meets the needs of a variety of sophisticated controller applications (Figure 1). Notes: All Signals with a preceding front slash, "/", are active Low, e.g.: B//W (WORD is active Low); /B/W (BYTE is active Low, only). Power connections follow conventional descriptions below: Connection Power Ground Circuit VCC GND Device VDD VSS Output Input Vcc GND XTAL Port 3 Machine Timing & Inst. Control ALU WDT , POR 1/2 Counter/ Timers † FLAG Interrupt Control Register Pointer Two Analog Comparators Register File 78/145 x 8Bit Prg. Memory 512/1K x 8Bit Program Counter Serial * Peripheral Interface † Z86C03 has one counter/timer. * Serial Peripheral Interface for the Z86C06 only. Port 2 I/O (Bit Programmable) Figure 1. Z86C03/C06 Functional Block Diagram DS95DZ80300 2 Z86C03/C06 CMOS Z8 ® 8-BIT CCP™ CONSUMER CONTROLLER PROCESSORS PIN DESCRIPTION Table 1. 18-Pin DIP and SOIC Pin Identification P24 P25 P26 P27 VCC XTAL2 XTAL1 P31 P32 1 2 3 4 5 6 7 8 9 18 17 16 Z86C03 15 and Z86C06 14 DIP 13 12 11 10 P23 P22 P21 P20 GND P36 P35 P34 P33 No 1-4 5 6 7 8-10 11-13 14 15-18 Symbol P24-27 VCC XTAL2 XTAL1 P31-33 P34-36 GND P20-23 Function Direction Port 2, pins 4, 5, 6, 7 In/Output Power Supply Crystal Oscillator Clock Output Crystal Oscillator Clock Input Port 3, pins 1, 2, 3 Port 3, pins 4, 5, 6 Ground Port 2, pins 0, 1, 2, 3 Fixed Input Fixed Output In/Output Figure 2. 18-Pin DIP Pin Configuration P24 P25 P26 P27 Vcc XTAL2 XTAL1 P31 P32 1 2 3 4 5 6 7 8 9 18 17 16 P23 P22 P21 P20 GND P36 P35 P34 P33 Z86C03 and Z86C06 SOIC 15 14 13 12 11 10 Figure 3. 18-Pin SOIC Pin Configuration DS95DZ80300 3 Z86C03/C06 CMOS Z8® 8-BIT CCP™ C ONSUMER CONTROLLER PROCESSORS ABSOLUTE MAXIMUM RATINGS Symbol VCC VIHM TSTG TA Description Min Max +7.0 12 +150 Units V V °C °C Stresses g.


Z86C04 Z86C06 Z86C08


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)