IP78M15ADP

LAB MECHANICAL DATA Dimensions in mm (inches) SEME IP78M15ADP IP78M15DPA 3 TERMINAL LOW CURRENT 15 VOLT POSITIVE VOLTAGE REGULATOR FEATURES 0.01%/V LINE REGULATION 0.3%/A LOAD REGULATION PostScript Picture C:\APPROVED\PACKAGES\PLASTIC\D PACK.EPS THERMAL OVERLOAD PROTECTION SHORT CIRCUIT PROTECTION SAFE OPERATING AREA PROTECTION 1% OUTPUT VOLTAGE TOLERANCE D–PACK — TO251 plastic package Pin 1 – VIN Pin 2 – GND Pin 3 – VOUT ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VI PD Tj Tstg TL Semelab plc. DC Input Voltage Power Dissipation Operating Junction Temperature Range Maximum Junction Temperature Storage Temperature Range Lead Temperature (Soldering, 10 sec) Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk 35V Internally limited 0°C to 125°C 125°C –65°C to +150°C 300°C Prelim. 9/94 LAB ELECTRICAL CHARACTERISTICS (Tj = 25°C unless stated) Parameter Test Conditions IO = 100mA VIN = 23V IO = 5mA to 350mA VIN = 18 to 30V Tj = 0 to 125°C PD £ PMAX IO = 200mA VIN = 17.5 to 30V IO = 200mA VIN = 20 to 30V Tj = 0 to 125°C IO = 500mA VIN = 20 to 26V IO = 5mA to 500mA VIN = 23V Tj = 0 to 125°C IO = 350mA VIN = 23V Tj = 0 to 125°C IO = 5 to 500mA VIN = 23V Tj = 0 to 125°C IO = 200mA VIN = 20 to 30V Tj = 0 to 125°C IP78M15ADP Min. Typ. Max. 14.85 15 15.15 14.55 4 4 4 12 4 0.1 0.2 90 57 57 70 70 2 300 1.0 1.5 2.5 600 1.4 6.0 Min. 14.4 VO Output Voltage* 15.45 14.25 22 22 22 75 6 0.5 0.8 6...