Type 103P
Vishay Sprague
Paper Capacitors Metal Case, Film/Foil, 10 Ampere Thru-Pass, Subminiature
FEATURES
• Bulkhead mounting • Excellent RFI specifications • Hermetically encased • Low inductance connection • Low insertion loss
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55°C to + 125°C. Capacitance Range: 0.001µF to 1.0µF. Capacitance Tolerance: ± 20%, ± 10%. Voltage Rating: 200 WVDC to 600 WVDC. Current Rating: 10 ampere maximum. Dissipation Factor: 1.0% maximum. DC Resistance: 0.01 ohm maximum. Voltage Test: 200% of rated voltage for 1 minute. Insulation Resistance: At + 25°C: 20,000 Megohm Microfarads or 30,000 Megohm minimum. At + 85°C: 200 Megohm - Microfarads or 300 Megohm minimum.
DC Life Test: 140% of rated voltage for 250 hours @ + 125°C. No open or short circuits. No visible damage. Maximum ∆ Cap.: ± 5%. Minimum I.R. = 30% of initial limit. Maximum D.F. = 1.5%. Moisture Resistance: MIL-STD-202, Method 106E, 10 cycles. No visible damage. Maximum ∆ Cap.: ± 5%. Minimum I.R. = 30% of initial limit. Maximum D.F. = 1.5%. Thermal Shock and Immersion Cycling: No visible damage. Maximum ∆ Cap.: ± 5%. Minimum I.R. = 30% of initial limit. Maximum D.F. = 1.5%.
PHYSICAL CHARACTERISTICS
Lead Pull: 5 pounds (2.3 kilograms) for one minute. No physical damage. Lead Bend: After three complete consecutive bends, no damage. Marking: Sprague® trademark, type or part number, capacitance and voltage.
ENVIRONMENTAL CHARACTERISTICS
Vibration Test (Condition A): No mechanical damage, short, open or intermittent circuits.
DIMENSIONS in inches [millimeters]
Circuit Diagram
0.312 ± 0.031 [7.92 ± 0.79] 1.625 + 1.000 - 0.0 [41.28 + 25.40 - 0.0] L
± 0.031 [0.79]
1.625 + 1.000 - 0.0 [41.28 + 25.40 - 0.0]
0.255 [6.48] 0.250 [6.35] Across Flats
D + 0.015 [0.38] - 0.005 [0.130] Dia. External Toothed Lockwasher Pt. No. 2-123
0.125 [3.18] Max.
0.040 + 0.004 - 0.001 [1.02 + 0.10 - 0.02] Dia. No. 18 AWG Solid Tinned Leads
0.125 ± 0.015 [3.18 ± 0.38]
Nut 5/16 [7.938] 24 UNF-2A Pt. No. 6-113
Straddle Milled Flats on Thread for Locking on Mounting Surface
0.437 ± 0.015 [11.10 ± 0.38] Across Flats
www.vishay.com 96
For technical questions, contact
[email protected]
Document Number: 42032 Revision 17-Nov-03
Type 103P
Vishay Sprague
DIMENSIONS in inches [millimeters]
Tab Terminals
C L 0.020 ± 0.005 [0.51 ± 0.13] 0.255 [6.48] 0.250 [6.35] C L Across Flats 0.020 ± 0.005 [0.51 ± 0.13]
C L C L 0.125 ± 0.015 [3.18 ± 0.38] Slot 0.062 x 0.125 [1.58 x 3.18] Slot 0.060 [1.52] 0.050 [1.27] x 0.125 [3.18]
0.125 ± 0.015 [3.18 ± 0.38]
0.296 ± 0.062 [7.52 ± 1.57]
0.187 ± 0.015 [4.75 ± 0.38]
0.296 ± 0.015 [7.52 ± 0.38]
0.187 ± 0.015 [4.75 ± 0.38] 0.156 ± 0.015 [3.96 ± 0.38]
.312 ± 0.031 [7.92 ± 0.79]
0.156 ± 0.015 [3.96 ± 0.38] 5/16 [7.938] 24 UNF 2A THD
STANDARD RATINGS in inches [millimeters]
CAPACITANCE (µF) PART NUMBER* TAB TERMINAL WIRE LEAD 200 WVDC 0.047 0.10 0.22 0.47 1.00 103P473X0200T 103P104X0200T** 103P224X0200T 103P474X0200T** 103P105X020.