DatasheetsPDF.com

SC1766 Dataheets PDF



Part Number SC1766
Manufacturers Semtech Corporation
Logo Semtech Corporation
Description BATTERY CHARGE CONTROLLER
Datasheet SC1766 DatasheetSC1766 Datasheet (PDF)

BATTERY CHARGE CONTROLLER Janaury 30, 1998 SC1766 TEL:805-498-2111 FAX:805-498-3804 WEB:http://www.semtech.com DESCRIPTION The SC1766 fast charge controller IC is designed for intelligent charging of NiMH or NiCd batteries without overcharging. It detects a voltage drop (-∆V) occurring in the final stage of a fast charging cycle and correspondingly controls the charging current. Fast charge can also be cut off by a peak voltage timer (0∆V). The detection of -∆V is a very reliable method to te.

  SC1766   SC1766



Document
BATTERY CHARGE CONTROLLER Janaury 30, 1998 SC1766 TEL:805-498-2111 FAX:805-498-3804 WEB:http://www.semtech.com DESCRIPTION The SC1766 fast charge controller IC is designed for intelligent charging of NiMH or NiCd batteries without overcharging. It detects a voltage drop (-∆V) occurring in the final stage of a fast charging cycle and correspondingly controls the charging current. Fast charge can also be cut off by a peak voltage timer (0∆V). The detection of -∆V is a very reliable method to terminate fast charging for NiMH and NiCd batteries. The SC1766 uses -∆V detection as one of the primary decisions for fast charge cut-off. The -∆V value of the SC1766 is as small as 4mV per cell, particularly suitable for NiMH as well as NiCd batteries. The peak voltage timer is particularly useful when the voltage drop at the end of charge for some batteries, e.g. NiMH cells, is not pronounced enough for reliable detection. An adjustable safety timer (3 settings) is used as a backup termination method. Provisions are made with the SC1766 to prevent fast charge under temperature fault conditions. Two LED outputs are used to indicate the charging status. Another flash LED output can be used alone to indicate charge status. AC mode allows the battery to drive its loads while being charged. Test mode is provided to dramatically reduce production test time. FEATURES • Reliable fast charge control of NiMH/NiCd • batteries Fast charge termination by: 1 Accurate -∆V detection level -0.25% with respect to peak value 2 Peak voltage timer (0∆V) Adjustable fast charge safety timer Protection against temperature fault Protection against short-circuited and open batteries Wide operation voltage range of 9V to 18V, no extra regulator needed Large battery voltage detection range of 0.65V to 3.7V LED drivers to indicate charge status or fault conditions Voltage reference output Quick and easy testing for production Space saving 8-pin and 14-pin SO packages • • • • • • • • • ORDERING INFORMATION DEVICE (1) PACKAGE SO-8 SO-14 SC1766CS08 SC1766CS14 Note: (1) Add suffix ‘TR’ for tape and reel. APPLICATIONS Battery chargers for: • Mobile phones • Notebook and laptop personal computers • Portable power tools and toys • Portable communications equipment • Portable video and stereo equipment ABSOLUTE MAXIMUM RATINGS Parameter Supply Voltage DC Voltage Applied to any Pin Sink Current of VOUT pin, LED pin, and FLASH pin Operating Temperature Range Storage Temperature Range TA TSTG Symbol VCC Maximum 18 18 Units V V 20 mA 0 to 70 -65 to 150 °C °C © 1997 SEMTECH CORP. 652 MITCHELL ROAD NEWBURY PARK CA 91320 BATTERY CHARGE CONTROLLER Janaury 30, 1998 SC1766 ELECTRICAL CHARACTERISTICS Unless otherwise specified, TA = 25ºC, VIN = 12.5V Parameter Supply Voltage Supply Current -∆V detection level w.r.t. peak value Voltage protection limits battery low battery high Input impedance of TIMER pin Input impedance of MODE pin Output resistance of LED pin fast charge trickle char.


SC1714 SC1766 SC1968


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)