Bulit-in Amp. Type OPIC Light Detector
IS485/IS486
IS485/IS486
s Features
1. Built-in schmidt trigger circuit 2. High sensitivity( E V : MAX. 35rx at Ta= 25˚C...
IS485/IS486
IS485/IS486
s Features
1. Built-in schmidt trigger circuit 2. High sensitivity( E V : MAX. 35rx at Ta= 25˚C ) 3. A wide range of operating supply voltage (V CC : 4.5 to 17V) 4. LSTTL and TTL compatible output 5. Low level output under incident light (IS485 ) High level output under incident light ( IS486 ) 6. Compact package
Bulit-in Amp. Type OPIC Light Detector
s Outline Dimensions
Internal connection diagram IS485 Voltage
regulator 15k Ω 3 2 1 Amp. 1.15 1.5 3.0 0.75 4˚ 4.0 4˚ R0.5 4˚ 60 ˚ 16.5 ± 1.0 + 18.0 - 1.5 1.0 1.6 2.6 4˚ 0.15 1.4 2 - 0.8 3 - 0.45 - 0.3 0.1
+
( Unit : mm )
IS486 Voltage
regulator 15k Ω 3 2 1 Amp. Gate burr
MAX.
Rugged resin 0.8 MAX.
3 - 0.4 +- 0.3 0.1
s Applications
1. Floppy disk drive units 2. Copiers, printers, facsimiles 3. VCRs, cassette decks 4. Automatic vending machines
1.27 1.6 6˚ 6˚ 1 6˚ 2.8 6˚ 2 1.27 6˚ 6˚ 3 1.27
1 GND 2 VO 3 V CC
* “ OPIC ” ( Optical IC ) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and signalprocessing circuit integrated onto a single chip. * Unspecified tolerance shall be ± 0.2mm.
s Absolute Maximum Ratings
Parameter Supply voltage Output current Power dissipation Operating temperature Storage temperature *1 Soldering temperature Symbol V CC Io P T opr T stg T sol Rating - 0.5 to + 17 50 175 - 25 to + 85 - 40 to + 100 260
( Ta= 25˚C )
Unit V mA mW ˚C ˚C ˚C
*1 For 5 seconds at the position of 1.4mm from the bottom face of package.
“ In the absence of confir...