IS455
IS455
s Features
1. Liner output 2. Capable of output voltage level adjustment due to external resistor
Linear O...
IS455
IS455
s Features
1. Liner output 2. Capable of output voltage level adjustment due to external resistor
Linear Output Type OPIC Light Detector
s Outline Dimensions
4.4± 1
0.3 0.2
( Unit : mm )
1.67 4 2.5 5.0±
0.1
Main detector (PD1) center
3.81±
2 10 ˚ 10˚
3
Adjustment detector (PD2) center
0.1
5.0 ± 0.1 (0.67)
3.5
3.5
s Applications
1. Copiers
0.15
θ θ 10˚ θ = 7.5˚ + - 5˚
10 ˚ 10 ˚ 4.3 (0.5) (0.5)
0.5 0.4 3.81 4.9
Internal connection diagram Voltage
regulator 4 1 IO Main detector ( PD1 ) 2 GND 1 3 GND 2 4 VCC Adjustment detector ( PD2 ) 3
*“ OPIC ” ( Optical IC ) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and signalprocessing circuit integrated onto a single chip.
s Enlarged Figure of Light Detecting Portion
820 425 530 296
( Unit : µm )
s Absolute Maximum Ratings
Parameter Supply voltage Output voltage Output current Power dissipation Operating temperature Storage temperature *1 Soldering temperature Symbol V CC VO IO PO Topr Tstg Tsol
( Ta= 25˚C )
Unit V V mA mW ˚C ˚C ˚C
Main detector (PD1) center
820 Chip center
Adjustment detector (PD2) center
Rating - 0.5 to +8 - 0.5 to VCC - 10 150 - 25 to + 85 - 40 to + 85 260
*1 For 3 seconds at the position of 1mm from the bottom face of resin package.
“ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs, data books, etc. Contac...