128 SEG / 65 COM DRIVER & CONTROLLER FOR STN LCD
S6B0755
128 SEG / 65 COM DRIVER & CONTROLLER FOR STN LCD
JUNE. 2000. Ver. 1.0
Prepared by
Hyoung_Seok ,Lee
mailto:l...
Description
S6B0755
128 SEG / 65 COM DRIVER & CONTROLLER FOR STN LCD
JUNE. 2000. Ver. 1.0
Prepared by
Hyoung_Seok ,Lee
mailto:lhs98@samsung.co.kr Contents in this document are subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of LCD Driver IC Team.
128 SEG / 65 COM DRIVER & CONTROLLER FOR STN LCD
PRELIMINARY SPEC. VER. 1.0
S6B0755
S6B0755 Specification Revision History Version 0.0 0.1 Original Append PAD configuration Append COG/ILB align key coordinates and TOM coordinate Append PAD center coordinates to table 1, 2 Added 6800-mode interface description for data latch with (page 12) C2 CAP value : 0.1 to 0.47uF → 0.47 to 2.0uF (page 30) Added description of the column address operation. (page 35) Added that Display On/Off command has priority over Entire Display On/Off and Reverse Display On/Off. (page 39) Added N-line inversion command description (page 43) Modify 6800 parallel interface timing Fix the TBD Value of DC Characteristics. Modify dynamic current consumption value(Idd2.Idds1) Content Date Dec.1999 Jan.2000
0.2
Jan.2000
0.3 1.0
Feb.2000 Jun.2000
2
S6B0755
PRELIMINARY SPEC. VER. 1.0
128 SEG / 65 COM DRIVER & CONTROLLER FOR STN LCD
CONTENTS
INTRODUCTION ..................................................................................................................................................1 BLOCK DIAGRA...
Similar Datasheet