Document
J210 / J211 / J212 / MMBFJ210 / MMBFJ211 / MMBFJ212
J210 J211 J212
MMBFJ210 MMBFJ211 MMBFJ212
G
S G S
TO-92
D
SOT-23
Mark: 62V / 62W / 62X
D
NOTE: Source & Drain are interchangeable
N-Channel RF Amplifier
This device is designed for HF/VHF mixer/amplifier and applications where Process 50 is not adequate. Sufficient gain and low noise for sensitive receivers. Sourced from Process 90.
Absolute Maximum Ratings*
Symbol
VDG VGS IGF TJ ,Tstg Drain-Gate Voltage Gate-Source Voltage Forward Gate Current
TA = 25°C unless otherwise noted
Parameter
Value
25 - 25 10 -55 to +150
Units
V V mA °C
Operating and Storage Junction Temperature Range
5
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.
Thermal Characteristics
Symbol
PD RθJC RθJA
TA = 25°C unless otherwise noted
Characteristic
Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient J210-212 350 2.8 125 357
Max
*MMBFJ210-212 225 1.8 556
Units
mW mW/°C °C/W °C/W
*Device mounted on FR-4 PCB 1.6" X 1.6" X 0.06."
1997 Fairchild Semiconductor Corporation
J210/J211/J212/MMBFJ210/J211/J212, Rev A
J210 / J211 / J212 / MMBFJ210 / MMBFJ211 / MMBFJ212
N-Channel RF Amplifier
(continued)
Electrical Characteristics
Symbol Parameter
TA = 25°C unless otherwise noted
Test Conditions
Min
Max
Units
OFF CHARACTERISTICS
V (BR)GSS IG S S V GS(off) Gate-Source Breakdown Voltage Gate Reverse Current Gate-Source Cutoff Voltage I G = 1.0 µ A, V DS = 0 V G S = 15 V, V D S = 0 V D S = 15 V, I D = 1.0 nA 210 211 212 - 25 - 100 -1.0 - 2.5 - 4.0 -3.0 - 4.5 - 6.0 V pA V V V
ON CHARACTERISTICS
ID S S Zero-Gate Voltage Drain Current* V DS = 15 V, V GS = 0 210 211 212 2.0 7.0 15 15 20 40 mA mA mA
SMALL SIGNAL CHARACTERISTICS
g fs Common Source Forward Transconductance V D S = 15 V, V G S = 0, f = 1.0 kHz 210 211 212 V D S = 15 V, V G S = 0, f = 1.0 kHz 4000 6000 7000 12,000 12,000 12,000 200 µ mhos µ mhos µ mhos µ mhos
g oss
Common Source Output Conductance
*Pulse Test: Pulse Width ≤ 300 µS
Typical Characteristics
Parameter Interactions Common Drain-Source
J210 / J211 / J212 / MMBFJ210 / MMBFJ211 / MMBFJ212
N-Channel RF Amplifier
(continued)
Typical Characteristics
(continued)
Transfer Characteristics
Transfer Characteristics
Leakage Current vs. Voltage
Noise Voltage vs. Frequency
5
Transconductance vs. Drain Current
Output Conductance vs. Drain Current
J210 / J211 / J212 / MMBFJ210 / MMBFJ211 / MMBFJ212
N-Channel RF Amplifier
(continued)
Typical Characteristics
(continued)
Capacitance vs. Voltage
Common Source Characteristics
Input Admittance
os)
Forward Transadmittance
Output Admittance
Reverse Transadmittance
J210 / J211 / J212 / MMBFJ210 / MMBFJ211 / MMBFJ212
N-Channel RF Amplifier
(continued)
Common Gate Characteristics
Input Admittance Forward Transadmittance
Output Admittance
Reverse Transadmittance
5
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ DenseTrench™ DOME™ EcoSPARK™ E2CMOSTM EnSignaTM FACT™ FACT Quiet Series™
DISCLAIMER
FAST FASTr™ FRFET™ GlobalOptoisolator™ GTO™ HiSeC™ ISOPLANAR™ LittleFET™ MicroFET™ MICROWIRE™ OPTOLOGIC™
OPTOPLANAR™ PACMAN™ POP™ PowerTrench QFET™ QS™ QT Optoelectronics™ Quiet Series™ SILENT SWITCHER SMART START™ Stealth™
SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ UHC™ UltraFET VCX™
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet I.