DatasheetsPDF.com

ISP1106DH Dataheets PDF



Part Number ISP1106DH
Manufacturers NXP
Logo NXP
Description Advanced Universal Serial Bus transceivers
Datasheet ISP1106DH DatasheetISP1106DH Datasheet (PDF)

ISP1105/1106/1107 Advanced Universal Serial Bus transceivers Rev. 06 — 30 November 2001 Product data 1. General description The ISP1105/1106/1107 range of Universal Serial Bus (USB) transceivers are fully compliant with the Universal Serial Bus Specification Rev. 1.1. They are ideal for portable electronics devices such as mobile phones, digital still cameras, Personal Digital Assistants (PDA) and Information Appliances (IA). They allow USB Application Specific ICs (ASICs) and Programmable Logic .

  ISP1106DH   ISP1106DH



Document
ISP1105/1106/1107 Advanced Universal Serial Bus transceivers Rev. 06 — 30 November 2001 Product data 1. General description The ISP1105/1106/1107 range of Universal Serial Bus (USB) transceivers are fully compliant with the Universal Serial Bus Specification Rev. 1.1. They are ideal for portable electronics devices such as mobile phones, digital still cameras, Personal Digital Assistants (PDA) and Information Appliances (IA). They allow USB Application Specific ICs (ASICs) and Programmable Logic Devices (PLDs) with power supply voltages from 1.65 V to 3.6 V to interface with the physical layer of the Universal Serial Bus. They have an integrated 5 V to 3.3 V voltage regulator for direct powering via the USB supply VBUS. The ISP1105/1106/1107 range can be used as a USB device transceiver or a USB host transceiver. They can transmit and receive serial data at both full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) data rates. ISP1105 allows single/differential input modes selectable by a MODE input and it is available in HBCC16 package. ISP1106 allows only differential input mode and is available in both TSSOP16 and HBCC16 packages. ISP1107 allows only single-ended input mode and is available in both TSSOP16 and HBCC16 packages. 2. Features s s s s s s s s s s s s Complies with Universal Serial Bus Specification Rev. 1.1 Integrated bypassable 5 V to 3.3 V voltage regulator for powering via USB VBUS VBUS disconnection indication through VP and VM Used as a USB device transceiver or a USB host transceiver Supports full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) serial data rates Stable RCV output during SE0 condition Two single-ended receivers with hysteresis Low-power operation Supports an I/O voltage range from 1.65 V to 3.6 V 4 kV on-chip ESD protection Full industrial operating temperature range −40 to +85 °C Available in small TSSOP16 (except ISP1105) and HBCC16 packages. Philips Semiconductors ISP1105/1106/1107 Advanced USB transceivers 3. Applications s Portable electronic devices, such as: x Mobile phone x Digital still camera x Personal Digital Assistant (PDA) x Information Appliance (IA). 4. Ordering information Table 1: Ordering information Package Name ISP1105W[1] ISP1106W ISP1107W ISP1106DH ISP1107DH [1] Type number Description plastic, heatsink bottom chip carrier; 16 terminals; body 3 × 3 × 0.65 mm Version SOT639-2 HBCC16 TSSOP16 plastic thin shrink small outline package; 16 leads; body width 4.4 mm SOT403-1 The ground terminal of ISP1105W is connected to the exposed diepad (heatsink). 4.1 Ordering options Table 2: Product ISP1105 ISP1106 ISP1107 [1] [2] [3] Selection guide Package(s) HBCC16 TSSOP16 or HBCC16 TSSOP16 or HBCC16 Description Supports both single-ended and differential input modes[1] Supports only the differential input mode[2] Supports only the single-ended input mode[3] Refer to Table 5 and Table 6. Refer to Table 6. Refer to Table 5. 9397 750 08872 © Koninklijke Philips Electronics N.V. 2001. All rights.


ISP1106 ISP1106DH ISP1106W


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)