KSY10

Hall Sensor KSY 10 Features High sensitivity High operating temperature range High linearity Low offset voltage Low TC of sensitivity and internal resistance Plastic-encapsulated miniature package Typical applications Detection of speed Detection of position Detection of diaphragm position in pressure pickup cans Magnetic field measurement at permanent magnets Magnetic field measurement at magnetic yokes for current determination Magnetic field measurement in dc motors for contactless commutation Dimensions in mm Type KSY 10 Ordering Code Q62705-K38 The position sensor KSY 10 is an ion-implanted Hall generator made of mono-crystalline GaAs material. It is enclosed in a tubular plastic package with four tags. When operating the sensor with a constant supply current, the output Hall voltage is directly proportional to the magnetic field acting upon the sensor. This sensor is outstanding for its high inductive sensitivity and very low temperature coefficient. Semiconductor Group 1 07.96 KSY 10 The Hall sensor’s active area is approx. 0.2 mm × 0.2 mm. It is placed approx. 0.35 mm below the plastic surface of the front side and is concentric towards the adjusting marking on the rear. The chip carrier is non-magnetic. The position sensor KSY 10 is particularly suitable for sensing the position of magnets and of softmagnetic material, resp., if the sensor itself is mounted on a magnet. Maximum ratings Parameter Operating temperature Storage tempera...