8-bit serial-in parallel-out shift register
INTEGRATED CIRCUITS
74F164 8-bit serial-in parallel-out shift register
Product specification IC15 Data Handbook 1995 Se...
Description
INTEGRATED CIRCUITS
74F164 8-bit serial-in parallel-out shift register
Product specification IC15 Data Handbook 1995 Sep 22
Philips Semiconductors
Philips Semiconductors
Product specification
8-bit serial-in parallel-out shift register
74F164
FEATURES
Gated serial data inputs Typical shift frequency of 100MHz Asynchronous Master Reset Buffered clock and data inputs Fully synchronous data transfer Industrial temperature range available (–40°C to +85°C)
DESCRIPTION
The 74F164 is an 8-bit edge-triggered shift register with serial data entry and an output from each of the eight stages. Data is entered through one of two inputs (Dsa, Dsb); either input can be used as an active High enable for data entry through the other input. Both inputs must be connected together or an unused input must be tied High. Data shifts one place to the right on each Low-to-High transition of the clock (CP) input, and enters into Q0 the logical AND of the two data inputs (Dsa, Dsb) that existed one setup time before the rising edge. A Low level on the Master Reset (MR) input overrides all other inputs and clears the register asynchronously, forcing all outputs Low.
PIN CONFIGURATION
Dsa Dsb Q0 Q1 Q2 Q3 GND 1 2 3 4 5 6 7 14 VCC 13 Q7 12 Q6 11 Q5 10 Q4 9 8 MR CP
SF00717
TYPE 74F164
TYPICAL fmax 100MHz
TYPICAL SUPPLY CURRENT (TOTAL) 33mA
ORDERING INFORMATION
ORDER CODE DESCRIPTION 14-pin plastic DIP 14-pin plastic SO COMMERCIAL RANGE VCC = 5V ±10%, Tamb = 0°C to +70°C 74F164N 74F...
Similar Datasheet