Dual JK Negative Edge-Triggered Flip-Flop
74F112 Dual JK Negative Edge-Triggered Flip-Flop
April 1988 Revised July 1999
74F112 Dual JK Negative Edge-Triggered F...
Description
74F112 Dual JK Negative Edge-Triggered Flip-Flop
April 1988 Revised July 1999
74F112 Dual JK Negative Edge-Triggered Flip-Flop
General Description
The 74F112 contains two independent, high-speed JK flipflops with Direct Set and Clear inputs. Synchronous state changes are initiated by the falling edge of the clock. Triggering occurs at a voltage level of the clock and is not directly related to the transition time. The J and K inputs can change when the clock is in either state without affecting the flip-flop, provided that they are in the desired state during the recommended setup and hold times relative to the falling edge of the clock. A LOW signal on SD or CD prevents clocking and forces Q or Q HIGH, respectively. Simultaneous LOW signals on SD and CD force both Q and Q HIGH. Asynchronous Inputs: LOW input to SD sets Q to HIGH level LOW input to CD sets Q to LOW level Clear and Set are independent of clock Simultaneous LOW on CD and SD makes both Q and Q HIGH
Ordering Code:
Order Number 74F112SC 74F112SJ 74F112PC Package Number M16A M16D N16E Package Description 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Logic Symbols
Connection Diagram
IEEE/IEC
© 1999 Fairchild Semiconductor Corporation
DS009472
...
Similar Datasheet