20-bit registered driver
INTEGRATED CIRCUITS
74AVC16836 20-bit registered driver with inverted register enable (3-State)
Preliminary specificati...
Description
INTEGRATED CIRCUITS
74AVC16836 20-bit registered driver with inverted register enable (3-State)
Preliminary specification
Replaces datasheet 74AVC16836/74AVCH16836 dated 1998 Dec 07
1999 Jul 23
Philips Semiconductors
Philips Semiconductors
Preliminary specification
20-bit registered driver with inverted register enable (3-State)
74AVC16836
FEATURES
Wide supply voltage range of 1.2 V to 3.6 V Complies with JEDEC standard no. 8-1A/5/7. CMOS low power consumption Input/output tolerant up to 3.6 V DCO (Dynamic Controlled Output) circuit dynamically changes
output impedance, resulting in noise reduction without speed degradation
PIN CONFIGURATION
OE Y0 Y1 GND Y2 Y3 VCC Y4 Y5 Y6 GND Y7 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 CP A0 A1 GND A2 A3 VCC A4 A5 A6 GND A7 A8 A9 A10 A11 A12 GND A13 A14 A15 VCC A16 A17 GND A18 A19 LE
Low inductance multiple VCC and GND pins for minimum noise
and ground bounce
Power off disables 74AVC16836 outputs, permitting Live Insertion
DESCRIPTION
The 74AVC16836 is a 20-bit universal bus driver. Data flow is controlled by output enable (OE), latch enable (LE) and clock inputs (CP). This product is designed to have an extremely fast propagation delay and a minimum amount of power consumption. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor (Live ...
Similar Datasheet