Two-Way Power Divider 400 kHz - 400 MHz
Two-Way Power Divider 400 kHz - 400 MHz
Features:
q q q q
DS-/DSS-113
V2.00
FP-2
PIN 0.015 DIA ±0.005 (0.38 ±0.13) 8 P...
Description
Two-Way Power Divider 400 kHz - 400 MHz
Features:
q q q q
DS-/DSS-113
V2.00
FP-2
PIN 0.015 DIA ±0.005 (0.38 ±0.13) 8 PLACES
1 2 3 4
Fully Hermetic Package (DSS-113) Three Decade Bandwidth Low Loss: 0.25dB Typically MIL-STD-202 Screening Available
(From -55°C to +85°C) DSS-113 0.4 - 400 MHz 0.75 dB Max. 25 dB Min. 0.15 dB Max. 1.5° Max. 1.6:1 Max.
0.312 MIN TYP (7.9 MIN)
Guaranteed Specifications*
DS-113 Frequency Range Insertion Loss (Less Coupling) Isolation Amplitude Balance Phase Balance VSWR (All Ports) 0.4 - 400 0.75 25 0.15 1.0° 1.5:1
5
6
7
8
0.385 ±0.020 (9.8 ±0.5)
0.080 (2.0) 0.100 (2.5) 0.250 (6.3) 0.51 (12.9 ±0.5) 0.350 (8.9) 0.150 MAX (3.8 MAX) 0.060 (1.5)
Operating Characteristics
Impedance Maximum Power Rating or Input Power Internal Load Dissipation 50 Ohms Nominal 1 W. Max. 0.05 W. Max. Dimensions in ( )in are in mm. Dimensions ( ) are in mm. Unless Otherwise Noted: .xxx = ±0.010 (.xx = ±0.25) .xx = ±0.02 (.x = ±0.5) WEIGHT (APPROX.): 0.09 OUNCES 2.5 GRAMS
Pin Configuration
DS-113 Σ Output ‘C’ Output ‘D’ Case and all other pins ground. P1 P4 P8 DSS-113S P1 P2 P4
SF-1
0.016 W±0.002 (0.41±0.5) x 0.010 T±0.001 (0.25±0.03) GROUND TAB ORIENTATION MARK 1 2 0.385±0.020 (0.8±0.5) 3 4 0.060 (1.52)
Ordering Information
Part Number DS-113 PIN DSS-113 PIN Package FP-2 Flatpack SF-1 Surface Mount
0.072 (1.83) 0.205 (5.21)
*All specifications apply with 50 ohm source and load impedance.
0.422 (10.72) 0.510±0.20 (12.9±0.5)
0.170 (4.31) MAX
Dimensions in ( ) ar...
Similar Datasheet