Document
Ordering number:EN5417A
NPN Triple Diffused Planar Silicon Transistor
2SC5301
Ultrahigh-Definition Color Display Horizontal Deflection Output Applications
Features
· High speed (tf=100ns typ). · High breakdown voltage (VCBO=1500V). · High reliability (Adoption of HVP process).
· Adoption of MBIT process.
Package Dimensions
unit:mm 2111A
[2SC5301]
20.0 5.0
20.7 26.0 2.8 3.0
2.0
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse)
Symbol
VCBO VCEO VEBO
IC ICP
Collector Dissipation
PC
Junction Temperature Storage Temperature
Tj Tstg
Tc=25˚C
1.75 2.9 1.2
12 3 5.45 5.45
0.6
5.45 5.45
1.0
3.1 1 : Base 2 : Collector 3 : Emitter SANYO : TO-3JML
Conditions
Ratings 1500 800 6 20 40 4.6 120 150
–55 to +150
Unit V V V A A W W ˚C ˚C
Electrical Characteristics at Ta = 25˚C
Parameter
Collector Cutoff Current Collector-to-Emitter Sustain Voltage Emitter Cutoff Current Collector Cutoff Current
DC Current Gain
Symbol
Conditions
ICES VCEO(sus)
IEBO ICBO hFE1 hFE2
VCE=1500V, RBE=0 IC=100mA, IB=0 VEB=4V, IC=0 VCB=800V, IE=0 VCE=5V, IC=1.0A VCE=5V, IC=16A
Ratings min typ max
Unit
1.0 mA
800 V
1.0 mA
10 µA
20 30
47
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
31099TH (KT)/91296YK (KOTO) TA-0794 No.5417–1/4
Continued from preceding page. Parameter
Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Storage Time Fall Time
Switching Time Test Circuit
2SC5301
Symbol
Conditions
VCE(sat) VBE(sat)
tstg tf
IC=16A, IB=4A IC=16A, IB=4A IC=12A, IB1=2.4A, IB2=–4.8A IC=12A, IB1=2.4A, IB2=–4.8A
Ratings min typ max
Unit
5V
1.5 V
3.0 µs
0.1 0.2 µs
No.5417–2/4
2SC5301
No.5417–3/4
2SC5301
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights o.