HY29F080T70

HY29F080 8 Megabit (1M x 8), 5 Volt-only, Flash Memory KEY FEATURES n 5 Volt Read, Program, and Erase – Minimizes system-level power requirements n High Performance – Access times as fast as 70 ns n Low Power Consumption – 15 mA typical active read current – 30 mA typical program/erase current – 5 µA maximum CMOS standby current n Compatible with JEDEC Standards – Package, pinout and command-set compatible with the single-supply Flash device standard – Provides superior inadvertent write protection n Sector Erase Architecture – Sixteen equal size sectors of 64K bytes each – A command can erase any combination of sectors – Supports full chip erase n Erase Suspend/Resume – Temporarily suspends a sector erase operation to allow data to be read from, or programmed into, any sector not being erased n Sector Group Protection – Sectors may be locked in groups of two to prevent program or erase operations within that sector group n Temporary Sector Unprotect – Allows changes in locked sectors (requires high voltage on RESET# pin) n Internal Erase Algorithm – Automatically erases a sector, any combination of sectors, or the entire chip n Internal Programming Algorithm – Automatically programs and verifies data at a specified address n Fast Program and Erase Times – Byte programming time: 7 µs typical – Sector erase time: 1.0 sec typical – Chip erase time: 16 sec typical n Data# Polling and Toggle Status Bits – Provide software confirmation of completion of program or erase operations ...