DatasheetsPDF.com

HVP10 Dataheets PDF



Part Number HVP10
Manufacturers Rectron Semiconductor
Logo Rectron Semiconductor
Description HIGH VOLTAGE ASSEMBLIED RECTIFIER
Datasheet HVP10 DatasheetHVP10 Datasheet (PDF)

RECTRON SEMICONDUCTOR TECHNICAL SPECIFICATION HIGH VOLTAGE ASSEMBLIED RECTIFIER VOLTAGE RANGE 5000 to 16000 Volts CURRENT 0.75 Amperes HVP5 THRU HVP16 FEATURES * Low cost * Low leakage * Isolated case * Surge overload rating - 50 amperes peak * Mounting position: Any * Low forward voltage drop MECHANICAL DATA * Epoxy: Device has UL flammability classification 94V-O MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 oC ambient temperature unless otherwise specified. Single phase, hal.

  HVP10   HVP10


Document
RECTRON SEMICONDUCTOR TECHNICAL SPECIFICATION HIGH VOLTAGE ASSEMBLIED RECTIFIER VOLTAGE RANGE 5000 to 16000 Volts CURRENT 0.75 Amperes HVP5 THRU HVP16 FEATURES * Low cost * Low leakage * Isolated case * Surge overload rating - 50 amperes peak * Mounting position: Any * Low forward voltage drop MECHANICAL DATA * Epoxy: Device has UL flammability classification 94V-O MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in millimeters MAXIMUM RATINGS (At TA = 25oC unless otherwise noted) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TA = 50oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Operating and Storage Temperature Range SYMBOL VRRM VRMS VDC IO HVP5 HVP8 HVP10 HVP12 HVP14 HVP15 HVP16 UNITS 5 8 10 12 14 15 16 K Volts 3.5 5.6 7.0 8.4 9.8 10.5 11.2 K Volts 5 8 10 12 14 15 16 K Volts 750 mAmps IFSM TJ,TSTG 50 -55 to + 150 Amps 0C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 0.75A DC Maximum DC Reverse Current at Rated DC Blocking Voltage NOTES: Enough heat sink must be considered in application. SYMBOL VF IR HVP5 8.0 HVP8 HVP10 HVP12 HVP14 HVP15 HVP16 UNITS 14.0 Volts 5.0 uAmps 2013-01 AVERAGE FORWARD CURRENT, (mA) RATING AND CHARACTERISTIC CURVES ( HVP5 THRU HVP16 ) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE 750 600 Single Phase Half Wave 60Hz Inductive or Resistive Load 450 300 150 0 0 50 100 150 175 AMBIENT TEMPERATURE, ( ) PEAK FORWARD SURGE CURRENT, (A) FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 60 50 8.3ms Single Half Sine-Wave (JEDEC Method) 40 30 20 10 0 1 10 100 NUMBER OF CYCLES AT 60Hz FIG. 3 - TYPICAL REVERSE CHARACTERISTICS 10 6 4 2 1.0 .6 .4 .2 TJ = 25 .1 .06 .04 .02 .01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) INSTANTANEOUS FORWARD CURRENT, (mA) HVP5~HVP8 HVP10~HVP16 FIG. 4 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1000 100 10 TJ = 25 1.0 Pulse Width = 300us 1% Duty Cycle 0.1 4 5 6 7 8 9 10 11 12 INSTANTANEOUS FORWARD VOLTAGE, (V) INSTANTANEOUS REVERSE CURRENT, (uA) RECTRON RECTRON Attachment information about HVPXX 1. Marking on the body Rectron Logo V Y M HVP X X Cathode Band Part No. Year-code: (Y:Last digit of year& A:2010,B:2011......) Month-code: (M:0~9,O,N,D) Voltage-code 5-------5000V 14-------14000V 8-------8000V 15-------15000V 10----10000V 16-------16000V 12----12000V 2. Items marked on the carton CUSTOMER TYPE QUANTITY LOT NO. REMARK DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures. .


HVM8 HVP10 HVP12


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)