VCO with sensitivity adjustment function
Optical disc ICs
VCO with sensitivity adjustment function
BA7042
The BA7042 is a monolithic IC comprising a VCO (voltag...
Description
Optical disc ICs
VCO with sensitivity adjustment function
BA7042
The BA7042 is a monolithic IC comprising a VCO (voltage controlled oscillator) with sensitivity adjusting capabilities. The oscillation frequency can be set with an external constant, and is controlled according to the control voltage. The BA7042 can be used to produce high-modulation-factor FM signals by superimposing its control voltage with AC signals, and to configure a PLL circuit just by attaching a frequency divider and a phase comparator.
FApplications FM intercom FM wireless microphone FSK modem
FFeatures 1) The number of external components is minimized. 2) Internal control amplifier for the VCO. 3) Oscillation frequency can be set with an external constant.
4) Maximum oscillation frequency of 18MHz. 5) DIP 8-pin package.
FBlock diagram
108
Optical disc ICs
FAbsolute maximum ratings (Ta = 25_C)
BA7042
FRecommended operating conditions
FElectrical characteristics (unless otherwise noted, Ta = 25_C, VCC=5.0V)
109
Optical disc ICs
FMeasurement circuit
BA7042
FApplication example
110
Optical disc ICs
FCircuit operation (1) Circuit configuration The control voltage, input through pin 1, is amplified by the control amplifier, then output to pin 7 and input to the VCO control circuit. The oscillation frequency of the VCO is determined by the attached capacitor and controlled according to the control voltage. Highly modulated FM signals can be produced by superimposing the control voltage with ...
Similar Datasheet