Optical disc ICs
4-channel BTL driver for CD players
BA6997FP / BA6997FM
The BA6997FP and BA6997FM, both designed for C...
Optical disc ICs
4-channel BTL driver for CD players
BA6997FP / BA6997FM
The BA6997FP and BA6997FM, both designed for CD players, have an internal 4-channel BTL driver and 5V
regulator (which requires attached
PNP transistor), as well as switches for the 5V
regulator and temperature monitor pins. FApplications CD players and other optical disc devices FFeatures 1) 4-channel BTL driver for CD players. 2) Wide dynamic range. 3) Internal thermal shutdown circuit. FAbsolute maximum ratings (Ta = 25_C)
4) Internal level shift circuit, for a minimum of attached components. 5) Internal 5V regular with switch.
FRecommended operating conditions (Ta = 25_C)
403
Optical disc ICs
FBlock diagram
BA6997FP/BA6997FM
404
Optical disc ICs
FPin descriptions
BA6997FP/BA6997FM
405
Optical disc ICs
BA6997FP/BA6997FM
FElectrical characteristics (unless otherwise noted, Ta = 25_C, VCC = 8V, f = 1kHz, RL = 8Ω)
406
Optical disc ICs
FApplication example
BA6997FP/BA6997FM
407
Optical disc ICs
FOperation notes (1) The BA6997FP and BA6997FM have an internal thermal shutdown circuit. Output current is muted when the chip temperature exceeds 175_C (typically). (2) The output current can be muted by opening the mute pin (pin 9) voltage or lowering it below 0.5V. This pin should be pulled up above 2.0V during normal operation. When muting occurs, the output pins output the internal bias voltage, roughly VCC / 2. (3) The
regulator can be turned off by opening the
regulator switch (pin 10) or ...