3-phase motor driver for VCR cylinders
Motor driver ICs
3-phase motor driver for VCR cylinders
BA6467FP-Y
The BA6467FP-Y is a motor driver developed for cylin...
Description
Motor driver ICs
3-phase motor driver for VCR cylinders
BA6467FP-Y
The BA6467FP-Y is a motor driver developed for cylinders. It contains a power supply with a constant voltage 8V, and a start / stop pin that opens the output. FApplications VCR cylinders FFeatures 1) 3-phase, full-wave, pseudo-linear drive system. 2) Internal constant voltage power supply (8V). 3) Internal thermal shutdown circuit. FAbsolute maximum ratings (Ta = 25_C)
FRecommended operating conditions (Ta = 25_C)
754
Motor driver ICs
FBlock diagram
BA6467FP-Y
755
Motor driver ICs
FPin descriptions
BA6467FP-Y
756
Motor driver ICs
FInput / output circuits (1) Start / stop (ST / SP: pin 9)
BA6467FP-Y
(2)
Torque limit (TL: pin20)
(3)
Torque control input (EC: pin19, ECR: pin 18)
(4)
Coil output (A1: pin 6, A2: pin4, A3: pin 3)
(5) Hall input (H1): pin10, H1–: pin 11, H2): pin 12, H2–: pin 13, H3): pin 14, H3–: pin 15)
757
Motor driver ICs
FElectrical characteristics (unless otherwise noted, Ta = 25_C, VCC = 12V)
BA6467FP-Y
758
Motor driver ICs
FCircuit operation (1) Hall I / O The 3-phase Hall signal is amplified in the hall amplifiers and sent to the matrix circuit, where the signal is further amplified and combined. After the signal is converted to a current in the amplitude control circuit, the current is supplied to the output driver, which then provides a motor drive current. The phases of the Hall input signal, output voltage, and output current are shown in Fig.1.
BA6467FP-Y
(2) To...
Similar Datasheet