BA6288FS

Motor driver ICs Reversible motor driver BA6288FS The BA6288FS is a reversible-motor driver with a maximum output current of 1.0A. Two logic inputs allow four output modes: forward, reverse, stop (idling), and brake. A built-in power saving circuit suppresses current consumption when the motor is in stop mode. FApplications Compact, low-current DC motors and portable equipment such as camcorders FFeatures 1) Two logic inputs allow four output modes: forward, reverse, stop (idling), and brake. 2) Built-in power saving circuit suppresses the stop mode current dissipation. FAbsolute maximum ratings (Ta = 25_C) 3) Output voltage can be set arbitrarily with the VREF pin. 4) Interfaces with TTL devices. 5) Built-in thermal shutdown circuit turns off all circuits when high IC junction temperature is detected. FRecommended operating conditions 445 Motor driver ICs FBlock diagram BA6288FS 446 Motor driver ICs FPin descriptions BA6288FS FElectrical characteristics (unless otherwise noted, Ta = 25_C, VCC = 6V, VM = 6V) 447 Motor driver ICs FInput / output truth table BA6288FS FInput / output circuits 448 Motor driver ICs FOperation notes (1) The quality of these products have been carefully checked; however, use of the products with applied voltages, operating temperatures, or other parameters that exceed the absolute maximum rating given may result in the damage of the IC and the product it is used in. If the IC is damaged, the short mode and open modes cannot be specif...