Dual high slew rate operational amplifier
Standard ICs
Dual high slew rate operational amplifier
BA4510F / BA4510FV
The BA4510F and BA4510FV are monolithic ICs t...
Description
Standard ICs
Dual high slew rate operational amplifier
BA4510F / BA4510FV
The BA4510F and BA4510FV are monolithic ICs that contain two operational amplifiers with high slew rate, featuring phase compensation. These ICs can be driven with a low-voltage power supply, requiring a power supply range of ± 1 to ± 3.5V for a dual power supply and 2 to 7V for a single power supply. In addition, an unbuffered type is used which enables ample output even in low voltage ranges, enabling swing at up to nearly the power supply voltage.
Features 1) Low-voltage operation. 2) High slew rate.
3) Wide dynamic output range. 4) Compact 8-pin SSOP-B package. (BA4510FV)
Block diagram
OUT1
1
8
VCC
– IN1
2
1ch – +
7
OUT2
+ IN1
3
+
2ch –
6
– IN2
VEE
4
5
+ IN2
1
Standard ICs
BA4510F / BA4510FV
Internal circuit configuration
VCC R1 X2 Q7 Q8 Q9
– IN + IN
Q1
Q2
A R5 X3 R2 VEE R3 R4
OUT
Absolute maximum ratings (Ta = 25°C)
Parameter Power supply voltage Power dissipation Differential input voltage Common-mode input voltage Operating temperature Storage temperature BA4510F BA4510FV Symbol VCC Pd VID VI Topr Tstg Limits ±5 550∗1 (SOP) 350∗2 (SSOP) ± VCC 0 ~ VCC – 20 ~ + 75 – 40 ~ + 125 Unit V mW V V °C °C
∗1 If used at temperatures higher than 25°C, reduce power by 5.5mW for each 1°C above Ta = 25°C. ∗2 If used at temperatures higher than 25°C, reduce power by 3.5mW for each 1°C above Ta = 25°C.
The value is 300mW when the IC is used alone. This value is the value meas...
Similar Datasheet