BA4510

Standard ICs Dual high slew rate operational amplifier BA4510F / BA4510FV The BA4510F and BA4510FV are monolithic ICs that contain two operational amplifiers with high slew rate, featuring phase compensation. These ICs can be driven with a low-voltage power supply, requiring a power supply range of ± 1 to ± 3.5V for a dual power supply and 2 to 7V for a single power supply. In addition, an unbuffered type is used which enables ample output even in low voltage ranges, enabling swing at up to nearly the power supply voltage. Features 1) Low-voltage operation. 2) High slew rate. 3) Wide dynamic output range. 4) Compact 8-pin SSOP-B package. (BA4510FV) Block diagram OUT1 1 8 VCC – IN1 2 1ch – + 7 OUT2 + IN1 3 + 2ch – 6 – IN2 VEE 4 5 + IN2 1 Standard ICs BA4510F / BA4510FV Internal circuit configuration VCC R1 X2 Q7 Q8 Q9 – IN + IN Q1 Q2 A R5 X3 R2 VEE R3 R4 OUT Absolute maximum ratings (Ta = 25°C) Parameter Power supply voltage Power dissipation Differential input voltage Common-mode input voltage Operating temperature Storage temperature BA4510F BA4510FV Symbol VCC Pd VID VI Topr Tstg Limits ±5 550∗1 (SOP) 350∗2 (SSOP) ± VCC 0 ~ VCC – 20 ~ + 75 – 40 ~ + 125 Unit V mW V V °C °C ∗1 If used at temperatures higher than 25°C, reduce power by 5.5mW for each 1°C above Ta = 25°C. ∗2 If used at temperatures higher than 25°C, reduce power by 3.5mW for each 1°C above Ta = 25°C. The value is 300mW when the IC is used alone. This value is the value meas...