Preset graphic equalizer
Audio ICs
Preset graphic equalizer for headphone stereos
BA3840KV
The BA3840KV is a preset graphic equalizer IC for hea...
Description
Audio ICs
Preset graphic equalizer for headphone stereos
BA3840KV
The BA3840KV is a preset graphic equalizer IC for headphone stereos. It combines two equalizer circuit channels on a single chip, and also includes a dynamic sound leak reduction circuit. FApplications Headphone stereos Portable CD players FFeatures 1) Four sound quality settings are possible by DC control. 2) High-frequency sounds can be cut off based on the volume. FBlock diagram
3) The sound leak reduction circuit can be turned on and off by DC control.
555
Audio ICs
FAbsolute maximum ratings (Ta = 25_C)
BA3840KV
FRecommended operating conditions (Ta = 25_C)
FElectrical characteristics(unless otherwise noted, Ta = 25_C, VCC = 2V, f = 1kHz, VIN = 100mVrms, F flat position on, sound leak reduction circuit off)
556
Audio ICs
FPin descriptions
BA3840KV
557
Audio ICs
BA3840KV
558
Audio ICs
BA3840KV
559
Audio ICs
FMeasurement circuit
BA3840KV
FCircuit operation (1) Preset graphic equalizer (1) Flat position By pulling up the FLAT pin to VCC, frequency characteristics become flat. (2) Rock position By pulling up the ROCK pin to VCC, low frequencies are boosted by about 7dB. High frequencies are also adjusted to balance the subjectively heard sound. (3) Pop position By pulling up the POPS pin to VCC, mid-range frequencies are boosted by about 6dB and combined with the rock position characteristics. (4) Jazz position By open-circuiting the above three pins, low frequencies are boosted by 14dB. Hig...
Similar Datasheet