DatasheetsPDF.com

BA3812L Dataheets PDF



Part Number BA3812L
Manufacturers Rohm
Logo Rohm
Description 5-channel graphic equalizer
Datasheet BA3812L DatasheetBA3812L Datasheet (PDF)

Audio ICs 5-channel graphic equalizer BA3812L The BA3812L is a five-point graphic equalizer that has all the required functions integrated onto one IC. The IC is comprised of the five tone control circuits and input and output buffer amplifiers. The BA3812L features low distortion, low noise, and wide dynamic range, and is an ideal choice for Hi-Fi stereo applications. It also has a wide operating voltage range (3.5V to 16V), which means that it can be adapted for use with most types of stereo .

  BA3812L   BA3812L


Document
Audio ICs 5-channel graphic equalizer BA3812L The BA3812L is a five-point graphic equalizer that has all the required functions integrated onto one IC. The IC is comprised of the five tone control circuits and input and output buffer amplifiers. The BA3812L features low distortion, low noise, and wide dynamic range, and is an ideal choice for Hi-Fi stereo applications. It also has a wide operating voltage range (3.5V to 16V), which means that it can be adapted for use with most types of stereo equipment. The five center frequencies are independently set using external capacitors, and as the output stage buffer amplifier and tone control section are independent circuits, fine control over a part of the frequency bandwidth is possible, By using two BA3812Ls, it is possible to construct a 10-point graphic equalizer. The amount of boost and cut can be set by external components. FApplications Radio cassette players, home stereo systems and car stereo systems. FFeatures 1) Minimizes the number of components required to build a graphic equalizer. 2) Low distortion and low noise. 3) Wide operating power supply voltage range (3.5V to 16V). FAbsolute maximum ratings (Ta = 25_C) 4) Low current dissipation (5 mA). 5) Wide dynamic range (VOM = 2.1Vrms / VCC = 8V). 6) Built-in input and output buffer amplifiers. FRecommended operating conditions (Ta = 25_C) 445 Audio ICs FBlock diagram BA3812L FElectrical characteristics (unless otherwise noted, Ta = 25_C, VCC = 8V, and fin = 1kHz) 446 Audio ICs FMeasurement circuit BA3812L FApplication example 447 Audio ICs By using more than one IC the following applications are also possible: (1) 10-point single-channel graphic equalizer As shown in Fig. 2, with two ICs it is possible to construct a 10-point single-channel graphic equalizer, BA3812L (2) 7-point stereo graphic equalizer As shown in Fig. 3, with three ICs it is possible to construct a 7-point stereo graphic equalizer. Two BA3812L ICs are used to construct a 5-point stereo graphic equalizer, and two of the active inductor circuits from a third BA3812L are added to each. 448 Audio ICs FSolid-state inductor A solid state inductor uses an active element and has the equivalent function of an inductor. The circuit shown in Fig. 4 is used in the BA3812L. This circuit employs two capacitors, a potentiometer, and a bias capacitor as external components, everything else is on the chip. The resonance frequency (fo) and the Q of the circuit are fixed by the values of the external capacitors. The circuit Q is obtained from the following formula: Q= CR1 CO RO BA3812L The resonance frequency is obtained from the following formula: fo (Hz) = 1 R0R1CC0 (R: Ω, C: F) 2π Q is the factor that determines the bandwidth of the frequency. If the amount of boost and cut are the same for the same resonance frequency, the larger the value of Q, the narrower the resonant frequency band. FElectrical characteristic curves 449 Audio ICs BA3812L FExternal dimensions (Units: mm) 450 .


BA3714F BA3812L BA3822FS


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)