Regulator ICs
Trickle-charge IC for two-cell, lithium-ion batteries
BA3170
The BA3170 is a trickle-charge IC developed ...
Regulator ICs
Trickle-charge IC for two-cell, lithium-ion batteries
BA3170
The BA3170 is a trickle-charge IC developed for two-cell, lithium-ion batteries.The IC includes a charge control circuit, a charge output
transistor, and an LED driver for showing the charging status. FApplications Lithium-ion (two cell) battery chargers, and charging circuits FFeatures 1) Output voltage can be varied using an external resistor. 2) The output pin is
PNP output with low saturation voltage. 3) Built-in output current limiting circuit protects batteries from excessive current, and prevents destruction of the IC due to output shorts. The initial charge current is set to a low value (the current limit pin voltage can be used to vary the current limit value). 4) Pulse charging at over 99% of the final voltage. FAbsolute maximum ratings (Ta = 25_C)
5) 6) 7) 8) 9)
Built-in over-discharge battery return circuit. Built-in charge fault protection circuit. Built-in over-voltage battery operation circuit. Built-in LED output for charge display (two outputs). 12-pin power package provides large power dissipation in a compact package. 10) Temperature protection circuit prevents thermal destruction of the IC.
FRecommended operating conditions (Ta = 25_C)
395
Regulator ICs
FBlock diagram
BA3170
396
Regulator ICs
FPin descriptions
BA3170
FElectrical characteristics (unless otherwise noted, Ta = 25_C, VCC = 12V, R1 = 58.7kΩ, R2 = 10kΩ)
397
Regulator ICs
BA3170
FOperation notes (1) Do not u...