Ground isolation amplifier
Audio ICs
Ground isolation amplifier
BA3121 / BA3121F / BA3121N
The BA3121,BA3121F and BA3121N are ground isolation amp...
Description
Audio ICs
Ground isolation amplifier
BA3121 / BA3121F / BA3121N
The BA3121,BA3121F and BA3121N are ground isolation amplifiers developed for use in car audio applications. These ICs efficiently eliminate problems caused by wiring resistance, and remove noise generated by the electrical devices used in automobiles. The capacitance values of the external capacitors required for the ICs are small to allow compact and reliable set design. FApplications Car audio systems FFeatures 1) Large capacitors not required 2) High common-mode rejection ratio (57dB typ. at f = 1kHz). 3) Low noise (VNO = 3.5µVrms Typ.). FAbsolute maximum ratings (Ta = 25_C)
4) Low distortion (THD = 0.002% Typ.). 5) Two channels.
FRecommended operating conditions (Ta = 25_C)
717
Audio ICs
FBlock diagrams
BA3121 / BA3121F / BA3121N
718
Audio ICs
BA3121 / BA3121F / BA3121N
FElectrical characteristics (unless otherwise noted, Ta = 25_C, VCC = 12V, f = 1kHz, Rg = 1.8kΩ)
719
Audio ICs
FMeasurement circuits
BA3121 / BA3121F / BA3121N
720
Audio ICs
FCircuit operation
BA3121 / BA3121F / BA3121N
Car-audio systems are earthed to the car body, and for this reason, electrical noise generated by the car electrics can enter the power amplifier input via the chassis, and become audible. The BA3121 makes use of the common-mode rejection characteristics of an operational amplifier to eliminate this noise. Without the BA3121 noise enters the power amplifier input directly, when used, the CMMR of operational amp...
Similar Datasheet