QUAD BAND POWER AMPLIFIER MODULE WITH INTERGRATED POWER CONTROL
FEATURES
ADVANCED PRODUCT INFORMATION - Rev 0.5
GSM850/GSM900/DCS/PCS Quad Band Power Amplifier ...
Description
FEATURES
ADVANCED PRODUCT INFORMATION - Rev 0.5
GSM850/GSM900/DCS/PCS Quad Band Power Amplifier Module With Integrated Power Control
AWT6146
InGaP HBT Technology Quad Band Applications +35 dBm GSM Output Power at 3.5 V
Integrated Power Control (CMOS)
+33 dBm DCS/PCS Output Power at 3.5 V 55% GSM850/900 PAE 50% DCS/PCS PAE Small Footprint 7mm x 7mm Low Profile 1.3mm Power Control Range >50 dB GPRS Capable (class 12)
APPLICATIONS
GSM850/GSM900/DCS/PCS Handsets Dual/Tri/Quad Band PDA
18 Pin 7mm x 7mm Amplifier Module
PRODUCT DESCRIPTION
This quad band power amplifier module is designed to support dual, tri and quad band applications. The module includes an integrated power control scheme that facilitates fast and easy production calibration and reduces the number of external components required to complete a power control function. The amplifiers power control range is typically 55 dB, with the output power set by applying an analog voltage to VRAMP. The logical control inputs,
V CC2 DCS/PCS
TX_EN and BS, are both 1.8 V and 3 V logic compliant. The TX_EN is used to enable the amplifier typically with the TX burst. The BS is used to select which amplifier is enabled. There are two amplifier chains, one to support GSM850/900 bands, the other for DCS/PCS bands. All of the RF ports for this device are internally matched to 50 W. Internal DC blocks are provided at the RF ports.
DCS/PCS_IN
DCS/PCS_OUT
BS TX _EN VBATT VREG V RAMP
Bias and Powe...
Similar Datasheet