DatasheetsPDF.com

AWS5502-S14 Dataheets PDF



Part Number AWS5502-S14
Manufacturers ANADIGICS Inc
Logo ANADIGICS  Inc
Description GaAs IC SPDT Reflective Switch Positive Control DC - 2.5 GHz
Datasheet AWS5502-S14 DatasheetAWS5502-S14 Datasheet (PDF)

A GaAs IC SPDT Reflective Switch Positive Control DC - 2.5 GHz Advanced Product Information Rev. 0 AWS5502-S14 FEATURES • Low Insertion Loss (0.4 dB @ 0.9 GHz) • Complementary Positive Control Voltages (0/+3V to 0/+5V) • Positive Voltage Supply (+3 to +5 V) • Low DC Power Consumption • Ultra Miniature 6 Lead SOT-6 Package DESCRIPTION The AWS5502 is a Single Pole Double Throw GaAs MMIC Switch assembled in a SOT-6 plastic package. The AWS5502 is designed for analog and digital application that .

  AWS5502-S14   AWS5502-S14


Document
A GaAs IC SPDT Reflective Switch Positive Control DC - 2.5 GHz Advanced Product Information Rev. 0 AWS5502-S14 FEATURES • Low Insertion Loss (0.4 dB @ 0.9 GHz) • Complementary Positive Control Voltages (0/+3V to 0/+5V) • Positive Voltage Supply (+3 to +5 V) • Low DC Power Consumption • Ultra Miniature 6 Lead SOT-6 Package DESCRIPTION The AWS5502 is a Single Pole Double Throw GaAs MMIC Switch assembled in a SOT-6 plastic package. The AWS5502 is designed for analog and digital application that require low insertion loss, small size, and low cost. State selection is achieved with a complimentary positive voltage (requires positive bias Vs, and blocking caps) or negative voltage (no Vs or blocking caps required). Typical applications include: selection of synthesizers, filters, amplifiers in dual mode and dual band handsets. ELECTRICAL SPECIFICATIONS AT 25 °C (0, +3V) Parameter 1 S14 SOT-6 6 Pin Plastic Package Frequency DC DC DC DC DC DC DC DC 0.5 1.0 2.0 2.5 0.5 1.0 2.0 2.5 2 Min Typ 0.4 0.45 0.6 0.9 25 20 14 13 1.2:1 1.5:1 Max 0.5 0.6 0.8 1.1 Unit Insertion Loss 3 GHz GHz GHz GHz GHz GHz GHz GHz - dB Isolation 22 17 11 10 - - dB VSWR 4 DC - 1.0 GHz DC - 2.5 GHz 1.3:1 1.7:1 - OPERATING CHARACTERISTICS AT 25° C (0, +3V) Parameter Switching Characteritics 5 Condition Rise, Fall (10/90% or 90/10% RF) ON, Off (50% CTL to 90%/10% RF) Video Feedthru For Two-tone Input Power +10 dBm @ +3V @ +5V Frequency 0.5 - 2.0 GHz 0.5 - 2.0 GHz 0.5 - 2.0 GHz Min - Typ 10 20 25 +45 +21 +28 Max - Unit ns ns mV dBm dBm Intermodulation Intercept Point (IP3) Input Power for 1dB Compression Control Voltage 1. 2. 3. 4. 5. V LOW = 0 to 0.2 V @ 20 uA Max V HIGH = +3 V @ 100 uA Max to +5 V @ 200 uA Max V S = V HIGH + 0.2V All measurements made in a 50 ohm system, unless otherwise specified. DC = 300 kHz. Insertion loss changes by 0.003 dB/°C. Insertion loss state. Video feedthru measured wirh 1 ns rise time pulse and 500 MHz bandwidth. A 1 ABSOLUTE MAXIMUM RATINGS Characteristics RF Input Power Control Voltage Operating Temperature Storage Temperature Value 2 W > 500 MHz, 0/+7 V Control -0.2 V, +8 V -40° C to +125°C -50°C to +150°C 25° C/W Advanced Product Information - Rev. 0 TRUTH TABLE Positive Operation V1 V High 0 V2 0 VHigh J1 - J2 Insertion Isolation J1 - J3 Isolation Insertion AWS5502-S14 qJC VHigh = +3 to +5 V (VS = VHigh + 0.2 V) PIN OUT RFOUT 2 (J3) Pin Function RFOUT (J2) GND RFIN (J1)/Vs RFOUT 1 (J2) V2 V1 D escription RF port (can be used as an i nput or as an output) Ground connecti on (keep as short as possi ble) RF common port and bi as voltage for posi ti ve control (3V to 5V) RF port (can be used as an i nput or as an output) C ontrol voltage 2 (low 0V , hi gh 3V to 5V ) C ontrol voltage 1 (low 0V , hi gh 3V to 5V) C1 GND 5 2 V1 V2 C4 RFOUT 1 (J2) 1 2 3 4 5 6 6 1 RFIN (J1) 4 3 C2 R1 Vs 10K W DC blocking capacitors (C1, 2, 4) and biasing resistor must be supplied externally for positive voltage operation. C1, 2, 4 = 100 pF for operation >500 MHz. TEST CIRCUIT LAYOUT Vs A 2 Advanced Product Information - Rev. 0 PACKAGE OUTLINE DRAWING AWS5502-S14 S502 θ NOTES: 1. Package body sizes exclude mold flash and gate burrs. 2. Dimension L is measured in gage plane 3. Coplanarity: 0.1000 mm 4. Tolerance + 0.1000 mm (4 mil) unless otherwise specified. SYMBOLS DIMENSIONS IN MILLIMETERS DIMENSIONS IN INCHES A A1 A2 b C D E e H L θ1 MIN 1.00 0.00 0.70 0.35 0.10 2.70 1.40 2.60 0.37 1° NOM 1.10 −−− 0.80 0.40 0.15 2.90 1.60 1.90(TYP) 2.80 −−− 5° MAX 1.30 0.10 0.90 0.50 0.25 3.10 1.80 3.00 −−− 9° MIN 0.039 0.00 0.027 0.014 0.004 0.106 0.055 NOM 0.043 −−− 0.031 0.016 0.006 0.114 0.063 0.075(TYP) 0.102 0.110 0.015 −−− 1° 5° MAX 0.051 0.004 0.035 0.020 0.010 0.122 0.071 0.118 −−− 9° Tel: (908) 668-5000 / Fax: (908) 668-5132 Email: [email protected] www.anadigics.com IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or discontinue any product at any time without notice. The Advanced Product data sheets and product specifications contained in this data sheet are subject to change prior to a products formal introduction. The information in this data sheet has been carefully checked and is assumed to be reliable. However, ANADIGICS assumes no repsponsibility for inaccuracies. ANADIGICS strongly urges customers to verift that the informationn they are using is current before placing orders. WARNING ANADIGICS products are not intened for use in life support appliances, device, or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. ANADIGICS, Inc. 35 Technology Drive Warren, New Jersey 07059 A 3 .


AWL10G AWS5502-S14 AWS5503-S15


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)