EBS26UC6APS

DATA SHEET 256MB SDRAM S.O.DIMM EBS26UC6APS (32M words × 64 bits, 2 bank) Description The EBS26UC6APS is 32M words × 64 bits, 2 banks Synchronous Dynamic RAM Small Outline Dual In-line Memory Module (S.O.DIMM), mounted 8 pieces of 256M bits SDRAM (EDS2516APTA) sealed in TSOP package. This module provides high density and large quantities of memory in a small space without utilizing the surface mounting technology. Decoupling capacitors are mounted on power supply line for noise reduction. Features Fully compatible with 8 bytes S.O.DIMM: JEDEC standard outline 144-pin socket type small outline dual in line memory module (S.O.DIMM)  PCB height: 31.75mm (1.25inch )  Lead pitch: 0.80mm 3.3V power supply Clock frequency: 100MHz/133MHz (max.) LVTTL interface Data bus width: × 64 non-ECC Single pulsed /RAS 4 Banks can operates simultaneously and independently Burst read/write operation and burst read/single write operation capability Programmable burst length (BL): 1, 2, 4, 8, Full page 2 variations of burst sequence  Sequential  Interleave Programmable /CAS latency (CL): 2, 3 Byte control by DQMB Refresh cycles: 8192 refresh cycles/64ms 2 variations of refresh  Auto refresh  Self refresh Document No. E0225E20 (Ver. 2.0) Date Published December 2001 (K) Japan URL: http://www.elpida.com C Elpida Memory, Inc. 2001 EBS26UC6APS Ordering Information Part number EBS26UC6APS-7A EBS26UC6APS-75 * EBS26UC6APS-80 EBS26UC6APS-7AL EBS26UC6APS-75L* EBS26UC...