1 GB Registered SDRAM DIMM
DATA SHEET
1 GB Registered SDRAM DIMM
EBS11RC4ACNA (128M words × 72 bits, 2 banks)
Description
The EBS11RC4ACNA is 128M...
Description
DATA SHEET
1 GB Registered SDRAM DIMM
EBS11RC4ACNA (128M words × 72 bits, 2 banks)
Description
The EBS11RC4ACNA is 128M words × 72 bits, 2 banks Synchronous Dynamic RAM Registered Module, mounted 36 pieces of 256M bits SDRAM sealed in TCP package. This module provides high density and large quantities of memory in a small space without utilizing the surface mounting technology. Decoupling capacitors are mounted on power supply line for noise reduction. Note: Do not push the cover or drop the modules in order to protect from mechanical defects, which would be electrical defects.
Features
Fully compatible with 8 bytes DIMM: JEDEC standard outline 168-pin socket type dual in line memory module (DIMM) PCB height: 30.48mm (1.20inch) Lead pitch: 1.27mm 3.3V power supply Clock frequency: 133MHz (max.) LVTTL interface Data bus width: × 72 ECC Single pulsed /RAS 4 Banks can operates simultaneously and independently Burst read/write operation and burst read/single write operation capability Programmable burst length (BL): 1, 2, 4, 8 2 variations of burst sequence Sequential Interleave Programmable /CAS latency (CL): 2, 3 Registered inputs with one clock delay Byte control by DQMB Refresh cycles: 8192 refresh cycles/64ms 2 variations of refresh Auto refresh Self refresh 1 piece of PLL clock driver, 3 pieces of register driver and 1 piece of serial EEPROM (2k bits) for Presence Detect (SPD) on PCB.
Document No. E0106E30 (Ver. 3.0) Date Pub...
Similar Datasheet