2GB Registered DDR SDRAM DIMM
PRELIMINARY DATA SHEET
2GB Registered DDR SDRAM DIMM
EBD21RD4ABNA (256M words × 72 bits, 2 Banks)
Description
The EBD21...
Description
PRELIMINARY DATA SHEET
2GB Registered DDR SDRAM DIMM
EBD21RD4ABNA (256M words × 72 bits, 2 Banks)
Description
The EBD21RD4ABNA is a 256M words × 72 bits, 2 bank Double Data Rate (DDR) SDRAM Module, mounted 36 pieces of DDR SDRAM sealed in TCP package. Read and write operations are performed at the cross points of the CK and the /CK. This highspeed data transfer is realized by the 2-bit prefetchpipelined architecture. Data strobe (DQS) both for read and write are available for high speed and reliable data bus design. By setting extended mode register, the on-chip Delay Locked Loop (DLL) can be set enable or disable. This module provides high density mounting without utilizing surface mount technology. Decoupling capacitors are mounted beside each TCP on the module board. Note: Do not push the cover or drop the modules in order to avoid mechanical defects, which may result in electrical defects.
Features
184-pin socket type dual in line memory module (DIMM) PCB height: 30.48mm Lead pitch: 1.27mm 2.5V power supply Data rate: 266Mbps/200Mbps (max.) 2.5 V (SSTL_2 compatible) I/O Double Data Rate architecture; two data transfers per clock cycle Bi-directional, data strobe (DQS) is transmitted /received with data, to be used in capturing data at the receiver Data inputs and outputs are synchronized with DQS 4 internal banks for concurrent operation (Component) DQS is edge aligned with data for READs; center aligned with data for WRITEs Differential clock in...
Similar Datasheet