CMOS Programmable Peripheral Interface
82C55A
June 1998
CMOS Programmable Peripheral Interface
Description
The Intersil 82C55A is a high performance CMOS vers...
Description
82C55A
June 1998
CMOS Programmable Peripheral Interface
Description
The Intersil 82C55A is a high performance CMOS version of the industry standard 8255A and is manufactured using a self-aligned silicon gate CMOS process (Scaled SAJI IV). It is a general purpose programmable I/O device which may be used with many different microprocessors. There are 24 I/O pins which may be individually programmed in 2 groups of 12 and used in 3 major modes of operation. The high performance and industry standard configuration of the 82C55A make it compatible with the 80C86, 80C88 and other microprocessors. Static CMOS circuit design insures low operating power. TTL compatibility over the full military temperature range and bus hold circuitry eliminate the need for pull-up resistors. The Intersil advanced SAJI process results in performance equal to or greater than existing functionally equivalent products at a fraction of the power.
Features
Pin Compatible with NMOS 8255A 24 Programmable I/O Pins Fully TTL Compatible High Speed, No “Wait State” Operation with 5MHz and 8MHz 80C86 and 80C88 Direct Bit Set/Reset Capability Enhanced Control Word Read Capability L7 Process 2.5mA Drive Capability on All I/O Ports Low Standby Power (ICCSB) . . . . . . . . . . . . . . . . .10µA
Ordering Information
PART NUMBERS 5MHz 8MHz
CP82C55A-5 IP82C55A-5 CS82C55A-5 IS82C55A-5 CD82C55A-5 ID82C55A-5 8406601QA CP82C55A IP82C55A CS82C55A IS82C55A CD82C55A ID82C55A 8406602QA
PACKAGE
40 Ld PDIP 4...
Similar Datasheet