Triple Video Drivers with Selectable
• Three video anti-aliasing or reconstruction ﬁlters
• 2:1 Mux inputs for YPbPr / RGB or YPbPr / YC-CV inputs
• Supports D1, D2, D3 and D4 video D-connector
• Selectable 8MHz/15MHz/30MHz 6th order ﬁlters plus
bypass for SD (480i), Progressive (480p) and HD
• AC-coupled inputs include DC restore /bias circuitry
• All outputs can drive AC or DC coupled 75Ω loads and
provide either 0dB or 6dB of gain
• 0.6% differential gain, 0.4° differential phase
• Lead-free packaging
• Progressive scan
• Cable set top boxes
• Satellite set top boxes
• DVD players
• Personal Video Recorders (PVR)
• Video On Demand (VOD)
The FMS6407 offers comprehensive ﬁltering for TV, set top
box or DVD applications. This part consists of a triple 6th
order ﬁlter with selectable 30MHz, 15MHz, or 8MHz cutoff
frequencies. The ﬁlters may also be bypassed so that the
bandwidth is limited only by the output ampliﬁers.
A 2 to 1 multiplexer is provided on each ﬁlter channel.
The triple ﬁlters are intended for YPbPr, RGB and YC-CV
signals. The DC clamp levels are set according to the input
mux selection and the CV_SEL control input. YPbPr sync
tips are clamped to 250mV, 1.125V and 1.125V respectively
while RGB sync tips are all clamped to 250mV. CV mode
clamps Y and CV to 250mV while C is clamped to 1.l25V.
Sync clamp timing can be derived from the Y or Green input
channel or from the external SYNC_IN pin.
All channels nominally accept AC coupled 1Vpp signals.
Selectable 0dB or 6dB gain allows the outputs to drive 1Vpp
or 2Vpp signals into AC or DC coupled terminated loads
with a 1Vpp input. Input signals cannot exceed 1.5Vpp and
outputs cannot exceed 2.5Vpp.
The FMS6407 draws 525mW from a single 5.0V supply.
Tape and Reel
Temperature range for all parts: 0°C to +70°C.
Contact your local Fairchild Semiconductor
distributor for additional product information
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICES TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION
OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES
IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN
APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for
surgical implant into the body, or (b) support or sustain life, and (c) whose failure to per
form when properly used in accordance with instructions for use provided in the labeling,
can be reasonably expected to result in a signiﬁcant injury of the user.
2. A critical component in any component of a life support device or system whose failure
to perform can be reasonably expected to cause the failure of the life support device or
system, or to affect its safety or effectiveness.
May 21, 2004
© 2004 Fairchild Semiconductor Corporation