1 Mbit/ Low Voltage/ Serial Flash Memory With 25 MHz SPI Bus Interface
M25P10-A
1 Mbit, Low Voltage, Serial Flash Memory With 25 MHz SPI Bus Interface
FEATURES SUMMARY s 1 Mbit of Flash Memor...
Description
M25P10-A
1 Mbit, Low Voltage, Serial Flash Memory With 25 MHz SPI Bus Interface
FEATURES SUMMARY s 1 Mbit of Flash Memory
s
Figure 1. Packages
Page Program (up to 256 Bytes) in 1.5ms (typical) Sector Erase (256 Kbit) in 2 s (typical) Bulk Erase (1 Mbit) in 3 s (typical) 2.7 V to 3.6 V Single Supply Voltage SPI Bus Compatible Serial Interface 25 MHz Clock Rate (maximum) Deep Power-down Mode 1 µA (typical) Electronic Signature (10h) More than 100,000 Erase/Program Cycles per Sector More than 20 Year Data Retention
s s s s s s s s
8 1
SO8 (MN) 150 mil width
s
VFQFPN8 (MP) (MLP8)
ENHANCED VERSION OF THE M25P10 This device is an enhanced version of the M25P10. The enhanced features include: larger page size, shorter programming time, higher clock frequency.
February 2003
1/34
M25P10-A
SUMMARY DESCRIPTION The M25P10-A is a 1 Mbit (128K x 8) Serial Flash Memory, with advanced write protection mechanisms, accessed by a high speed SPI-compatible bus. The memory can be programmed 1 to 256 bytes at a time, using the Page Program instruction. The memory is organized as 4 sectors, each containing 128 pages. Each page is 256 bytes wide. Thus, the whole memory can be viewed as consisting of 512 pages, or 131,072 bytes. The whole memory can be erased using the Bulk Erase instruction, or a sector at a time, using the Sector Erase instruction. Figure 2. Logic Diagram
VCC
Figure 3. SO and VFQFPN Connections
M25P10-A S Q W VSS 1 2 3 4 8 7 6 5
AI05761B
VCC HOLD C D
D C S W HOLD M25P...
Similar Datasheet