400V 1A silicon rectifier
1 AMP SILICON RECTIFIERS
UF4001 THRU UF4007
TECHNICAL SPECIFICATION
FEATURES
Low cost construction utilising void-free ...
Description
1 AMP SILICON RECTIFIERS
UF4001 THRU UF4007
TECHNICAL SPECIFICATION
FEATURES
Low cost construction utilising void-free moulded plastic technique Plastic package has Underwriters Laboratories Flammability Classification 94V-0 Ultra fast recovery times for high efficiency High surge current capability Low leakage High temperature soldering capability : 250°C/10 seconds/9.5mm (.375in.) lead length at 2.3kg (5lb) tension Easily cleaned with Freon, Alcohol, Chlorothene and other similar solvents.
VOLTAGE
50 to 1000 Volts
CURRENT
1.0 Amp
DIMENSIONS - millimeters (inches) DO-41
25.4 (1.0) min. 2.7 (.107) 2.0 (.080)
MECHANICAL DATA
Case Terminals Polarity Mounting Position Weight : JEDEC DO-41, moulded plastic. : Plated axial leads, solderable per MIL-STD-202, Method 208. : Colour band denotes cathode end. : Any : 0.35 grams (0.012 ounce)
5.2 (.205) 4.1 (.160) Cathode Band
25.4 (1.0) min. .86 (.034) .71 (.028)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Symbols UF4001 Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum non-repetitive peak reverse voltage Maximum Average Forward Rectified Current 9.5mm (.375in.) Lead Length at TA = 55°C Peak Forward Surge Current, 8.3 ms single half sine - wave superimposed on rated load Maximum Instantaneous Forward Voltage at 1.0A Maximum Reverse Current at R...
Similar Datasheet