Low power quad operational amplifier
Philips Semiconductors Linear Products
Product specification
Low power quad operational amplifier
AU2902
DESCRIPTION...
Description
Philips Semiconductors Linear Products
Product specification
Low power quad operational amplifier
AU2902
DESCRIPTION
The AU2902 consists of four independent, high-gain, internally frequency-compensated operational amplifiers designed specifically to operate from a single power supply over a wide range of voltages.
PIN CONFIGURATION
D and N Packages
OUTPUT 1 1 2 3 4 5 6 7 –+ 2 + – 3 1 –+ 4 + – 14 13 12 11 10 9 8 OUTPUT 4 –INPUT 4 +INPUT 4 GND +INPUT 3 –INPUT 3 OUTPUT 3
UNIQUE FEATURES
In the linear mode, the input common-mode voltage range includes ground and the output voltage can also swing to ground, even though operated from only a single power supply voltage. The unity gain crossover frequency and the input bias current are temperature-compensated.
–INPUT 1 +INPUT 1 V+ +INPUT 2 –INPUT 2 OUTPUT 2
FEATURES
Internally frequency-compensated for unity gain Large DC voltage gain: 100dB Wide bandwidth (unity gain): 1MHz (temperature-compensated) Wide power supply range Single supply: 3VDC to 30VDC or dual Very low supply current drain: essentially independent of supply Low input bias current: 45nADC (temperature-compensated) Low input offset voltage: 2mVDC and offset current: 5nADC Differential input voltage range equal to the power supply voltage Large output voltage: 0VDC to VCC-1.5VDC swing
EQUIVALENT SCHEMATIC
V– 6 µA 100µA 6 µA Q5 Q6 CC Q7
Top View
supplies: ±1.5VDC to ±15VDC
voltage (1mW/op amp at +5VDC)
Q2 Q1
Q3
RSC OUTPUT
Q13 INPUT Q10 Q...
Similar Datasheet