Features
• Watchdog Adjustable • Over- and Undervoltage Detection of Vcc = 5V • Standby Modes On/Off via Ignition Pin VK...
Features
Watchdog Adjustable Over- and Undervoltage Detection of Vcc = 5V Standby Modes On/Off via Ignition Pin VKL15 Internal Time Delay for Output Signal Push-pull Output Driver Interference and Damage Protection According to ISO/CD 7637 ESD Protection
Watchdog IC
1. Description
The ATA6025 is a monolithic circuit based on Atmel’s smart power BCD60-III technology. It is a universal IC for monitoring basic functions of an automotive application. It is possible to monitor the battery voltage (VKL15) and an external 5V voltage
regulator. With the independent watchdog the correct function of a microcontroller can be observed. If a failure occurs, the output NOTL switches to high after a time delay. During standby mode the current consumption is reduced to a minimum.
ATA6025
Rev. 4716C–AUTO–09/05
Figure 1-1. Block Diagram
RREF
VB
VCC VKL15
VBG
Oscillator on chip trimming
BIAS current
OSC
- VCCH +
VCC over- and undervoltage
detection
-
+ VCCL
...