FAN7031

www.fairchildsemi.com FAN7031 2W Stereo Power Amplifier with Four Selectable Gain Setting and Headphone Drive Features 1.85WRMS and 2.45WRMS Power Per Each Channel Into 4Ω Load With Less Than 1% and 10% THD+N, Respectively Selectable Gain Via Internal Gain Control Circuit Which Eliminates External Gain Setting Resistors : 6dB, 10.3dB, 15.6dB, 21.6dB(Select) Low Quiescent Current : Typical 5.5mA@5V Low Shutdown Current : Typical 0.04µA@5V Fully Differential Input, Which Immunes the Common Mode Noise Stereo Headphone Drive Active Low Shutdown Logic Guaranteed Stability Under No Load Condition Thermally Enhanced Surface-Mount 20TSSOP-EP Package Description The FAN7031 is a dual fully differential power amplifier in a 20-pin TSSOP-EP thermally enhanced package. When delivering 1.85W of continuous RMS power into 4Ω speaker at 5V supply, the FAN7031 has less than 1% of THD+N over the entire audible frequency range, 20Hz to 20kHz. To save power consumption in the portable applications, the FAN7031 provides shutdown function. Setting the shutdown pin to ground level, the FAN7031 falls into shutdown mode and consumes less than 4µA over all supply voltage range, 2.7V to 5.5V. Two gain setting pins(G0 and G1) control the gain of the FAN7031. The gain is selectable to 6dB, 10dB, 15.6dB and 21.6dB. The FAN7031 provides the singleended(SE) operation by setting SE/BTL pin to above VDD/2. Using SE/BTL pin and a mechanical switch which provides at the headphone jack, SE m...