Low Voltage 2-Wire Digital Temperature Sensor with Thermal Alarm
www.fairchildsemi.com
FM75
Low Voltage 2-Wire Digital Temperature Sensor with Thermal Alarm
Features
• • • • • • User C...
Description
www.fairchildsemi.com
FM75
Low Voltage 2-Wire Digital Temperature Sensor with Thermal Alarm
Features
User Configurable to 9, 10, 11 or 12-bit Resolution Precision Calibrated to ±1°C from 0°C to 100°C Typical Temperature Range: –40°C to 125°C Low Operating Current (less than 250µA) Low Self Heating (0.2°C max in still air) Operating Voltage Range: 2.7V to 5.5V
Description
Within the FM75 are: a high-precision CMOS temperature sensor, a Delta-Sigma analog-to-digital converter and a SMBus compatible serial digital interface. Typical accuracy is ±2°C over the full temperature range of –40°C to 125°C and to ±1°C over the range of 0°C to 100°C, with 9- to 12-bit resolution. Default resolution is 9 bits. Thermal Alarm output, OS (Over-limit Signal) supports Interrupt and Comparator modes. OS is active, if the user-programmable trip-temperature is exceeded. When the temperature falls below the trip-temperature plus the user-programmable hysteresis limit, OS is disabled. Available packages are surface mount SOIC-8 (SOP-8) and MSOP-8.
Applications
Battery Management FAX Management Printers Portable Medical Instruments HVAC Power Supply Modules Disk Drives Computers Automotive
Application Diagram
2.7 to 5.5V
8
A0
User Programmable Address
7 6 5
A1 A2
FM75
8 Pin Configuration
3
O.S.
SMBus Interface
SDA SCL
1 2
4
REV. 1.0.4 10/3/02
FM75
PRODUCT SPECIFICATION
Pin Assignments
SDA SCL O.S. GND
1 8
VDD A0 A1 A2
2
7
FM75
3 6 4 5
Pin Descripti...
Similar Datasheet