M-986-2A1P

M-986-2A1 MF Transceiver Features Direct A-Law or µ-Law PCM digital input 2.048 Mb/s clocking Operates with standard codecs for analog interfacing Microprocessor read/write interface Binary or 2-of-6 data formats Dual-channel 5 volt power Description The M-986-2A1 dual channel MF Transceiver contains all the logic necessary to transmit and receive (North American) CCITT Region 1 multifrequency signals on one integrated circuit (IC). Operating with a 20.48 MHz crystal, the M-986 is capable of providing a direct digital interface to a mlaw or A-law encoded PCM digital input. Each channel can be connected to an analog source using a coderdecoder (codec) as shown in the Block Diagram below. The M-986 is configured and controlled through an integral coprocessor port. Applications Test equipment Trunk adapters Paging terminals Traffic recorders PBXs Ordering Information Part # M-986-2A1P M-986-2A1PL Description 40-pin plastic DIP 44-pin PLCC Block Diagram DS-M986-2A1 www.clare.com 1 M-986-2A1 Absolute Maximum Ratings Over Specified Temperature Range Supply voltage range, VCC Input voltage range Output voltage range Ambient air temperature range Storage temperature range -0.3 V to 7 V -0.3 V to 15 V -0.3 V to 15 V 0˚ to 150˚C -45˚C to 150˚C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated ...