LZ2413

LZ2413H LZ2413H DESCRIPTION The LZ2413H is a 1/4-type (4.5 mm) solid-state image sensor that consists of PN photo-diodes and CCDs (charge-coupled devices). With approximately 270 000 pixels (542 horizontal x 492 vertical), the sensor provides a stable high-resolution color image. 1/4-type Color CCD Area Sensors with 270 k Pixels PIN CONNECTIONS 14-PIN HALF-PITCH WDIP TOP VIEW OD 1 ØRS 2 NC1 3 14 GND 13 ØV4 12 ØV3 11 ØV2 10 ØV1 9 PW 8 OFD FEATURES Number of effective pixels : 512 (H) x 492 (V) Number of optical black pixels – Horizontal : 2 front and 28 rear Pixel pitch : 7.2 µm (H) x 5.6 µm (V) Mg, G, Cy, and Ye complementary color filters Low fixed-pattern noise and lag No burn-in and no image distortion Blooming suppression structure Built-in output amplifier Built-in overflow drain voltage circuit and reset gate voltage circuit Horizontal shift register clock and reset gate clock voltage : 3.3 V (TYP.) Variable electronic shutter (1/60 to 1/10 000 s) Compatible with NTSC standard Package : 14-pin half-pitch WDIP [Plastic] (WDIP014-P-0400A) Row space : 10.16 mm OS 4 NC2 5 ØH2 6 ØH1 7 (WDIP014-P-0400A) PRECAUTIONS The exit pupil position of lens should be more than 25 mm from the top surface of the CCD. Refer to "PRECAUTIONS FOR CCD AREA SENSORS" for details. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, ...