DatasheetsPDF.com

LZ2314HJ Dataheets PDF



Part Number LZ2314HJ
Manufacturers Sharp Electrionic Components
Logo Sharp Electrionic Components
Description 1/3-type CCD Area Sensors with 270 k Pixels
Datasheet LZ2314HJ DatasheetLZ2314HJ Datasheet (PDF)

LZ2313H5/LZ2314HJ LZ2313H5/ LZ2314HJ DESCRIPTION The LZ2313H5/LZ2314HJ are 1/3-type (6.0 mm) solid-state image sensors that consist of PN photodiodes and CCDs (charge-coupled devices). With approximately 270 000 pixels (542 horizontal x 492 vertical), the sensor provides a stable high-resolution color (LZ2313H5)/B/W (LZ2314HJ) image. OD 1 ØRS 2 RD 3 1/3-type CCD Area Sensors with 270 k Pixels PIN CONNECTIONS 16-PIN SHRINK-PITCH WDIP TOP VIEW 16 GND 15 ØV4 14 ØV3 13 ØV2 12 ØV1 11 PW 10 OFD 9 .

  LZ2314HJ   LZ2314HJ


Document
LZ2313H5/LZ2314HJ LZ2313H5/ LZ2314HJ DESCRIPTION The LZ2313H5/LZ2314HJ are 1/3-type (6.0 mm) solid-state image sensors that consist of PN photodiodes and CCDs (charge-coupled devices). With approximately 270 000 pixels (542 horizontal x 492 vertical), the sensor provides a stable high-resolution color (LZ2313H5)/B/W (LZ2314HJ) image. OD 1 ØRS 2 RD 3 1/3-type CCD Area Sensors with 270 k Pixels PIN CONNECTIONS 16-PIN SHRINK-PITCH WDIP TOP VIEW 16 GND 15 ØV4 14 ØV3 13 ØV2 12 ØV1 11 PW 10 OFD 9 T1 FEATURES • Number of effective pixels : 512 (H) x 492 (V) • Number of optical black pixels – Horizontal : 2 front and 28 rear • Pixel pitch : 9.6 µm (H) x 7.5 µm (V) • Mg, G, Cy, and Ye complementary color filters (For LZ2313H5) • Low fixed-pattern noise and lag • No burn-in and no image distortion • Blooming suppression structure • Built-in output amplifier • Variable electronic shutter (1/60 to 1/10 000 s) • Compatible with NTSC standard (LZ2313H5)/ EIA standard (LZ2314HJ) • Package : 16-pin shrink-pitch WDIP [Ceramic] (WDIP016-N-0500C) Row space : 12.70 mm OS 4 NC1 5 NC2 6 ØH2 7 ØH1 8 (WDIP016-N-0500C) PRECAUTIONS • The exit pupil position of lens should be more than 25 mm (LZ2313H5)/20 mm (LZ2314HJ) from the top surface of the CCD. • Refer to "PRECAUTIONS FOR CCD AREA SENSORS" for details. COMPARISON TABLE TV standard Characteristics LZ2313H5 LZ2314HJ NTSC standard (Color) EIA standard (B/W) Refer to each following specification. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 1 LZ2313H5/LZ2314HJ PIN DESCRIPTION SYMBOL RD OD OS ØRS ØV1, ØV2, ØV3, ØV4 ØH1, ØH2 OFD PW GND T1 NC1, NC2 PIN NAME Reset transistor drain Output transistor drain Output signals Reset transistor clock Vertical shift register clock Horizontal shift register clock Overflow drain P-well Ground Test pin No connection ABSOLUTE MAXIMUM RATINGS PARAMETER Output transistor drain voltage Reset transistor drain voltage Overflow drain voltage Test pin, T1 Reset gate clock voltage Vertical shift register clock voltage Horizontal shift register clock voltage Voltage difference between P-well and vertical clock Storage temperature Ambient operating temperature SYMBOL VOD VRD VOFD VT1 VØRS VØV VØH VPW-VØV TSTG TOPR RATING 0 to +18 0 to +18 0 to +55 0 to +18 –0.3 to +18 –9.0 to +18 –0.3 to +18 –27 to 0 –40 to +85 –20 to +70 (TA = +25 ˚C) UNIT V V V V V V V V ˚C ˚C 1 NOTE NOTE : 1. The OFD clock ØOFD is excluded. 2 LZ2313H5/LZ2314HJ RECOMMENDED OPERATING CONDITIONS PARAMETER Ambient operating temperature Output transistor drain voltage Reset transistor drain voltage Overflow drain voltage Ground P-well voltage Test pin, T1 LOW level Vertical shift register clock INTERMEDIATE level HIGH level Horizontal shift register clock Reset gate clock LOW level HIGH level LOW level HIGH level LZ2313H5 LZ2314HJ When DC is applied When pulse is applied p-p level SYMBOL TOPR VOD VRD VOFD VØOFD GND VPW VT1 VØV1L, VØV2L VØV3L, VØV4L VØV1I, VØV2I VØV3I, VØV4I VØV1H, VØV3H VØH1L, VØH2L VØH1H, VØH2H VØRSL VØRSH fØV1, fØV2 fØV3, fØV4 fØH1, fØH2 fØRS 14.5 –0.05 4.7 4.5 0.0 VRD – 8.5 15.73 9.53 9.53 –8.5 MIN. 14.5 5.0 21.5 0.0 –9.0 VOD –8.0 0.0 15.0 0.0 5.0 17.0 0.05 6.0 VRD – 13.0 9.5 –7.5 VØVL TYP. 25.0 15.0 VOD 19.0 MAX. 16.0 UNIT ˚C V V V V V V V V V V V V V V kHz MHz MHz 1 2 NOTE Vertical shift register clock frequency Horizontal shift register clock frequency Reset gate clock frequency NOTES : • Connect NC1 and NC2 to GND directly or through a capacitor larger than 0.047 µF. 1. When DC voltage is applied, shutter speed is 1/60-second. 2. When pulse is applied, shutter speed is less than 1/60-second. * To apply power, first connect GND and then turn on VOFD. After turning on VOFD, turn on PW first and then turn on other powers and pulses. Do not connect the device to or disconnect it from the plug socket while power is being applied. 3 LZ2313H5/LZ2314HJ CHARACTERISTICS FOR LZ2313H5 (Drive method : Field accumulation) (TA = +25 ˚C, Operating conditions : The typical values specified in "RECOMMENDED OPERATING CONDITIONS". Color temperature of light source : 3 200 K, IR cut-off filter (CM-500, 1 mmt) is used.) PARAMETER Standard output voltage Photo response non-uniformity Saturation output voltage Dark output voltage Dark signal non-uniformity Sensitivity Smear ratio Image lag Blooming suppression ratio Output transistor drain current Output impedance Vector breakup Line crawling Luminance flicker SYMBOL VO PRNU VSAT VDARK DSNU R SMR AI ABL IOD RO 100 4.0 350 8.0 5.0 3.0 2.0 mA $ ˚, % % % 11 12 13 440 MIN. TYP. 150 MAX. 15 700 0.3 0.6 600 –81 3.0 2.0 –76 1.0 UNIT mV % mV mV mV mV dB % NOTE 2 3 4 1, 5 1, 6 7 8 9 10 NOTES : • VOFD should be adjusted to the minimum voltage such that ABL satisfy the specificat.


LZ2313H5 LZ2314HJ LZ2315A


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)