Serial Digital to Analogue RGB/YUV
0LFURYLGHR
z z z z z
Broadcast Quality Performance Multiple output capability Unique Clock Regenerator circuitry Blank t...
Description
0LFURYLGHR
z z z z z
Broadcast Quality Performance Multiple output capability Unique Clock Regenerator circuitry Blank to analogue line length Up to six cards in a single 1U frame
6HULHV
DAC210 Modules
Serial Digital to Analogue RGB/YUV
DAC214
These modules are part of our Series 200 range and are intended for broadcast quality applications. They offer a high level of features, with excellent specifications and performance. The conversion is performed to 10 bit resolution with a choice of either full 601, or near 601 filters (for single pass applications). The circuitry on the DAC210 modules contain a unique digital clock regenerator which removes distortion caused by jitter, giving a cleaner analogue output. This output is switchable between YUV/RGB. The module accepts both 525 or 625 line standards and can be set to automatically switch between them. For 525 (NTSC) applications there is the option to put set-up on the analogue signal. The DAC210 modules can also be set to blank to analogue video line length. This is a shaped blanking and is often needed as the digital line length is longer than the analogue one. There is also the option to pass or blank the VBI lines. For Low cost, monitoring applications, we offer the DAC211M. See seperate datasheet.
Input:
270Mb/s serial digital to EBU Tech. 3267-E & SMPTE 259M 625 and 525 line standards Analogue YUV or RGB (selectable), 700mV into 75R and mixed syncs, 2V p-p Sync on Green selectable 2nd set of outputs available...
Similar Datasheet