SCSI-II Active Terminator Preliminary Information
MIC5204
Micrel
MIC5204
SCSI-II Active Terminator
Preliminary Information
General Description
The MIC5204 is an active...
Description
MIC5204
Micrel
MIC5204
SCSI-II Active Terminator
Preliminary Information
General Description
The MIC5204 is an active terminator designed to comply with SCSI-II specifications. The MIC5204 is enabled by a CMOS or TTL compatible logic signal. When disabled, power consumption drops nearly to zero and the output goes into a high impedance state. Key MIC5204 features include protection against reversed battery, current limiting, and overtemperature shutdown.
Features
± 1% output voltage accuracy Guaranteed 500mA output Low quiescent current Low dropout voltage Extremely tight load and line regulation Very low temperature coefficient Current and thermal limiting Zero off-mode current Logic-controlled electronic shutdown Available in SO-8 and SOT-223 packages
2
Applications
SCSI-II active terminator Desktop, laptop, notebook, and palmtop computers Intelligent instrumentation Printers Disk drives Voltage reference
Ordering Information
Part Number Junction Temp. Range Package MIC5204BM MIC5204BS –40°C to +125°C –40°C to +125°C SO-8 SOT-223
Pin Configuration
VOUT VOUT NC GROUND MIC5204BM VIN VIN NC ENABLE
Typical Application
110Ω 110Ω 110Ω
Both VIN and both VOUT pins must be tied together. ENABLE must be pulled high for operation. TAB IS GROUND
+5V + 10µF
MIC5204 + 22µF
110Ω
SCSI Bus 18 to 27 Lines
1 2 3 IN GND OUT MIC5204-xxBS
February 1999
59
MIC5204
MIC5204
Micrel
Absolute Maximum Ratings (Note 1)
Input Voltage (VIN) .................
Similar Datasheet