AMC004DFLKA

FINAL AmC0XXDFLKA 4, 8, 20, or 32 Megabyte 5.0 Volt-only Flash Memory PC Card DISTINCTIVE CHARACTERISTICS s High performance — 150 ns maximum access time s Single supply operation — Write and erase voltage, 5.0 V ±5% — Read voltage, 5.0 V ±5% s CMOS low power consumption — 45 mA maximum active read current (x8 mode) — 65 mA maximum active write/erase current (x8 mode) s High write endurance — Minimum 100,000 program/erase cycles per sector — 1,000,000 typical program/erase cycles per card s PCMCIA/JEIDA 68-pin standard — Selectable byte-/or word-wide configuration s Write protect switch — Prevents accidental data loss s Zero data retention power — Batteries not required for data storage s Enhanced power management for standby mode — 1 µA typical standby current — Standard access time from standby mode s Separate attribute memory s Automated write and erase operations increase system write performance — 64K byte memory sectors for faster automated erase speed — Typically 1 s per single memory sector erase — Random address writes to previously erased bytes (8 µs typical per byte) s Total system integration solution — Support from independent software and hardware vendors s Low insertion and removal force — State-of-the-art connector allows for minimum card insertion and removal effort s Erase Suspend/Resume — Supports reading or programming data to a sector not being erased within the same device s Support for RY/BY and RESET signals GENERAL DESCRIPTION AMD’s 5.0 Volt-only Fla...