DatasheetsPDF.com

AN8006 Dataheets PDF



Part Number AN8006
Manufacturers Panasonic Semiconductor
Logo Panasonic Semiconductor
Description 3-pin Positive Output Low Dropout Voltage Regulator 50mA Type
Datasheet AN8006 DatasheetAN8006 Datasheet (PDF)

AN8000/AN8000M Series 3-pin Positive Output Low Dropout Voltage Regulator (50mA Type) s Overview The AN8000 series is 3-pin low-dropout fixed positive output monolithic voltage regulators. Since thier power consumption can be minimized, they are suitable for battery stabilizing power supply and reference voltage. Thirteen types of output voltage are available ; 2V, 2.5V, 3V, 3.5V (TO-92 only) , 4V, 4.5V, 5V, 6V, 7V, 8V, 8.5V, 9V, and 10V. 2.54 AN8000 Series Unit:mm 4.0±0.2 5.1±0.2 0.45 – 0.1 +.

  AN8006   AN8006


Document
AN8000/AN8000M Series 3-pin Positive Output Low Dropout Voltage Regulator (50mA Type) s Overview The AN8000 series is 3-pin low-dropout fixed positive output monolithic voltage regulators. Since thier power consumption can be minimized, they are suitable for battery stabilizing power supply and reference voltage. Thirteen types of output voltage are available ; 2V, 2.5V, 3V, 3.5V (TO-92 only) , 4V, 4.5V, 5V, 6V, 7V, 8V, 8.5V, 9V, and 10V. 2.54 AN8000 Series Unit:mm 4.0±0.2 5.1±0.2 0.45 – 0.1 + 0.2 5.0±0.2 13.5±0.5 2.3±0.2 1 : Input 2 : Output 3 : GND s Features 2 3 1 • Input/output voltage difference : 0.3V (max.) • Output current of up to 50mA • Low bias current ; 0.6mA (typ.) • Output voltage ; 2V, 2.5V, 3V, 3.5V (TO-92 only) , 4V, 4.5V, 5V, 6V, 7V, 8V, 8.5V, 9V, and 10V. • Over-voltage protective circuit built-in. (Bottom View) TO-92 Plastic Package (SSIP003-P-0000) AN8000M Series 4.6max. 1.8max. Unit:mm 1.6max. 0.48max. 1.5 3.0 0.8min. 4.25max. 0.44max. 1 : Output 2 : GND 3 : Input 0.58max. 1 2 3 3-pin Mini Power type Plastic Package (TO-243) (HSIP003-P-0000B) s Block Diagram Starter Voltage Reference + Error Amp. – Current Limiter R2 R1 : TO-92 : TO-243 R1=5kΩ CIN=0.33µF COUT=10µF 1 3 VI 2 3 – + 1 2 VO COUT 2.6max. 2.6 45˚ s Absolute Maximum Ratings (Ta=25˚C) Parameter Supply voltage Supply current Power dissipation Operating ambient temperature Storage temperature AN8000 Series AN8000M Series Symbol VI ICC PD Topr Tstg Rating 20 100 650 * –30 to+80 –55 to+150 –55 to+125 Unit V mA mW ˚C ˚C * Mounting onto the PCB (20 × 20 × 1.7mm glass epoxy copper foil 1 cm2 or more), for AN8000M Series. s Electrical Characteristics (Ta=25˚C) · AN8002/AN8002M (2V Type) Parameter Output voltage Line regulation Load regulation Symbol VO REGIN REGL VDIF (min.) Ibias RR Vno ∆VO/Ta Tj=25˚C Condition VI=2.5 to 8V, Tj=25˚C IO=1 to 40mA, Tj=25˚C IO=1 to 50mA, Tj=25˚C VI=1.9V, IO=20mA, Tj=25˚C VI=1.9V, IO=50mA, Tj=25˚C IO=0mA, Tj=25˚C VI=3 to 5V, f=120Hz f=10Hz to 100kHz Tj=–30 to+125˚C min 1.92 typ 2 2 7 10 0.06 0.12 0.6 max 2.08 40 20 25 0.2 0.3 1 Unit V mV mV mV V V mA dB µV mV/˚C Minimum I/O voltage difference Bias current Ripple rejection ratio Output noise voltage Output voltage temperature coefficient 62 74 60 0.1 Note1) The specified condition Tj=25˚C means that the test should be conducted with each test time reduced (within 10ms) so that the drift in characteristic value due to a temperature rise at chip junction can be ignored. Note2) Unless otherwise specified, VI=3V, IO=20mA, CO=10µF · AN8025/AN8025M (2.5V Type) Parameter Output voltage Line regulation Load regulation Minimum I/O voltage difference Bias current Ripple rejection ratio Output noise voltage Output voltage temperature coefficient Symbol VO REGIN REGL VDIF (min.) Ibias RR Vno ∆VO/Ta Tj=25˚C VI=3 to 8.5V, Tj=25˚C IO=1 to 40mA, Tj=25˚C IO=1 to 50mA, Tj=25˚C VI=2.4V, IO=20mA, Tj=25˚C VI=2.4V, IO=50mA, Tj=25˚C IO=0mA, Tj=25˚C VI=3.5 to 5.5V, f=120Hz f=10Hz to 100kHz Tj=–30 to+125˚C 60 Condition min 2.4 typ 2.5 2.5 8 12.5 0.07 0.12 0.6 72 65 0.13 max 2.6 50 20 25 0.2 0.3 1 Unit V mV mV mV V V mA dB µV mV/˚C Note1) The specified condition Tj=25˚C means that the test should be conducted with each test time reduced (within 10ms) so that the drift in characteristic value due to a temperature rise at chip junction can be ignored. Note2) Unless otherwise specified, VI=3.5V, IO=20mA, CO=10µF s Electrical Characteristics (Ta=25˚C) · AN8003/AN8003M (3V Type) Parameter Output voltage Line regulation Load regulation Symbol VO REGIN REGL VDIF (min.) Ibias RR Vno ∆VO/Ta Tj=25˚C Condition VI=3.5 to 9V, Tj=25˚C IO=1 to 40mA, Tj=25˚C IO=1 to 50mA, Tj=25˚C VI=2.9V, IO=20mA, Tj=25˚C VI=2.9V, IO=50mA, Tj=25˚C IO=0mA, Tj=25˚C VI=4 to 6V, f=120Hz f=10Hz to 100kHz Tj=–30 to+125˚C min 2.88 typ 3 3 9 15 0.07 0.12 0.6 max 3.12 50 25 30 0.2 0.3 1 Unit V mV mV mV V V mA dB µV mV/˚C Minimum I/O voltage difference Bias current Ripple rejection ratio Output noise voltage Output voltage temperature coefficient 58 70 70 0.15 Note1) The specified condition Tj=25˚C means that the test should be conducted with each test time reduced (within 10ms) so that the drift in characteristic value due to a temperature rise at chip junction can be ignored. Note2) Unless otherwise specified, VI=4V, IO=20mA, CO=10µF · AN8035/AN8035M (3.5V Type) Parameter Output voltage Line regulation Load regulation Minimum I/O voltage difference Bias current Ripple rejection ratio Output noise voltage Output voltage temperature coefficient Symbol VO REGIN REGL VDIF (min.) Ibias RR Vno ∆VO/Ta Tj=25˚C VI=4 to 9.5V, Tj=25˚C IO=1 to 40mA, Tj=25˚C IO=1 to 50mA, Tj=25˚C VI=3.4V, IO=20mA, Tj=25˚C VI=3.4V, IO=50mA, Tj=25˚C IO=0mA, Tj=25˚C VI=4.5 to 6.5V, f=120Hz f=10Hz to 100kHz Tj=–30 to+125˚C 57 Condition min 3.36 typ 3.5 3.5 10 20 0.07 0.12 0.6 69 75 0.2 max 3.64 50 30 40 0.2 0.3 1 Unit V mV mV mV V V mA dB µV mV/˚C Note1) The specified condition Tj=25˚C means tha.


AN8005M AN8006 AN8006M


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)