DatasheetsPDF.com

HPWA-MH00 Dataheets PDF



Part Number HPWA-MH00
Manufacturers Agilent(Hewlett-Packard)
Logo Agilent(Hewlett-Packard)
Description Super Flux LEDs
Datasheet HPWA-MH00 DatasheetHPWA-MH00 Datasheet (PDF)

H Super Flux LEDs Technical Data SunPower Series HPWA-MH00 HPWT-MH00 HPWA-DH00 HPWT-DH00 HPWA-ML00 HPWT-ML00 HPWA-DL00 HPWT-DL00 HPWR-M300 Benefits • Fewer LEDs Required • Lowers Total System Cost • Small and Large Area Displays • Backlighting Features • High Flux Output • Designed for High Current Operation • Low Thermal Resistance • Low Profile • Meets SAE/ECE/JIS Automotive Color Requirements • Packaged in Tubes for Use with Automatic Pick and Place Equipment Description This revolutiona.

  HPWA-MH00   HPWA-MH00


Document
H Super Flux LEDs Technical Data SunPower Series HPWA-MH00 HPWT-MH00 HPWA-DH00 HPWT-DH00 HPWA-ML00 HPWT-ML00 HPWA-DL00 HPWT-DL00 HPWR-M300 Benefits • Fewer LEDs Required • Lowers Total System Cost • Small and Large Area Displays • Backlighting Features • High Flux Output • Designed for High Current Operation • Low Thermal Resistance • Low Profile • Meets SAE/ECE/JIS Automotive Color Requirements • Packaged in Tubes for Use with Automatic Pick and Place Equipment Description This revolutionary package design allows the lighting designer to reduce the number of LEDs required and provide a more uniform and unique illuminated appearance than with existing LED solutions. This is possible through the package’s efficient optical design and high-current capabilities. The low profile package can be easily coupled to reflectors or lenses to efficiently distribute light and provide the desired illuminated appearance. This product family employs red, red-orange, and amber LED Applications • Automotive Exterior Lighting • Moving Message Panels materials, which allow designers to match the color of popular lighting applications, such as automotive tail, stop, and turn signal lamps, and area displays. Included in this family is the world’s brightest amber LED material, which is ideal for area displays and general backlighting applications. Device Selection Guide Part Number HPWR-M300 HPWA-MH00 HPWA-DH00 HPWA-ML00 HPWA-DL00 HPWT-MH00 HPWT-DH00 HPWT-ML00 HPWT-DL00 LED Color TS AlGaAs Red AS AlInGaP Red-Orange AS AlInGaP Amber TS AlInGaP Red-Orange TS AlInGaP Amber Total Flux φv (mlm) @ 70 mA[1] Typ. 800 1250 1250 2500 2500 Viewing Angle 2θ1/2 (Degrees) Typ. 90 90 60 90 60 70 40 70 40 Notes: 1. φV is the total luminous flux output as measured with an integrating sphere. 2. θ1/2 is the off axis angle from optical centerline where the luminous intensity is 1/2 the on-axis value. 5964-2064E 1-25 Outline Drawing CHAMFER 1.25 x 1.25 (0.049 x 0.049) 0.69 ± 0.20 2xR (0.027 ± 0.008) C CATHODE C 7.62 ± 0.50 (0.300 ± 0.020) φ 3.00 ± 0.20 ANODE (0.118 ± 0.008) A A 7.62 ± 0.50 (0.300 ± 0.020) 5.0° TYP. MX00 DX00 1.50 (0.059) OR 1.90 (0.075) 2.50 ± 0.50 (0.098 ± 0.020) 0.50 (0.020) TYP. 4.40 ± 0.20 (0.173 ± 0.008) 0.40 ± 0.20 TYP. (0.016 ± 0.008) 1.55 ± 0.20 TYP. (0.061 ± 0.008) 7.50 ± 0.20 (0.295 ± 0.008) 5.08 ± 0.30 (0.200 ± 0.012) NOTES: 1. DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. DIMENSIONS WITHOUT TOLERANCES ARE NOMINAL. 3. CATHODE LEADS ARE INDICATED WITH A "C" AND ANODE LEADS ARE INDICATED WITH AN "A". 0.76 ± 0.10 TYP. (0.030 ± 0.004) 5.08 ± 0.20 (0.200 ± 0.008) Absolute Maximum Ratings at TA = 25°C Parameter DC Forward Current[1] Power Dissipation Reverse Voltage (IR = 100 µA) Operating Temperature Range Storage Temperature High Temperature Chamber LED Junction Temperature Solder Conditions Preheat Temperature Solder Temperature HPWR-M300 70 161 10 -40 to +100 -55 to +100 HPWA-MX00/DX00 HPWT-MX00/DX00 [2,3] 70 70[2,3] 147 193 10 10 -40 to +100 -40 to +100 -55 to +100 -55 to +100 125°C, 2 hrs. max. 125°C 100°C 260°C for 5 seconds [1.5 mm (0.06 in.) below seating plane] Units mA mW V °C °C Notes: 1. Derate linearly as shown in Figure 4a and 4b. 2. Drive Currents between 10 mA and 30 mA are recommended for best long term performance. 3. Operation at currents below 10 mA is not recommended, please contact your Hewlett-Packard sales representative. 1-26 Optical Characteristics at TA = 25°C Total Flux φv (mlm) @ 70 mA[1] Min. Typ. 500 500 500 990 990 800 1250 1250 2500 2500 Peak Wavelength λpeak (nm) Typ. 655 621 592 626 594 Color, Dominant Wavelength λd (nm)[2] Typ. 643 615 590 617 592 Total Included Angle θ0.90 V (Degrees)[3] Typ. 95 95 75 95 75 100 70 100 70 Luminous Intensity/ Total Flux Iv (mcd)/φv (mlm) Typ. 0.7 0.6 0.85 0.6 0.85 0.6 1.25 0.6 1.25 Part Number HPWR-M300 HPWA-MH00 HPWA-DH00 HPWA-ML00 HPWA-DL00 HPWT-MH00 HPWT-DH00 HPWT-ML00 HPWT-DL00 Notes: 1. φv is the total luminous flux output as measured with an integrating sphere. 2. The dominant wavelength is derived from the CIE Chromaticity Diagram and represents the color of the device. 3. θ0.90 V is the included angle at which 90% of the total luminous flux is captured. Electrical Characteristics at TA = 25°C Forward Voltage VF (Volts) @ IF = 70 mA Min. Typ. Max. 2.01 2.25 2.75 2.01 2.25 2.75 2.01 2.25 2.75 2.25 2.65 3.00 2.25 2.65 3.00 Reverse Capacitance Breakdown C (pF) Thermal Speed of VR (Volts) VF = 0, Resistance Response @ IR = 100 µA f = 1 MHz RθJ-PIN (°C/W) τs (ns)[1] Min. Typ. Typ. Typ. Typ. 10 20 20 155 45 10 20 40 155 13 10 20 40 155 13 10 20 40 125 13 10 20 40 125 13 Part Number HPWR-M300 HPWA-MH00/DH00 HPWA-ML00/DL00 HPWT-MH00/DH00 HPWT-ML00/DL00 Note: 1. ts is the time constant, e-t/τs. 1.0 HPWA-XL00/ HPWT-XL00 HPWR-M300 70 HLMA-XX00 60 HPWR-M300 50 40 30 HPWT-XX00 20 10 HPWA-XH00/ XH00 HPWT-XH00 RED 0.5 AMBER REDORANGE 0 550 FORWARD CURRENT (mA) RELATIVE INTENSITY 600 WAVELENGTH (nm) 650 700 0 1.5 1.7 .


HPWA-DL00 HPWA-MH00 HPWA-ML00


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)